Snow Meth Inj Kit!

Labora said:
<-- Thinks buying the "Kits" is a big waste of money water/meth injection works. Just dont waste your money on a kit you can get all the parts they sell you for much cheaper and put together your own kit. Just my 2 cents.
I should really shut my mouth and start making these kits because people seem willing to pay way to much for them.
I replied to your other post...


The MR FReeze kit only works under boost and sprays into the INLET tube of the Vortech :nonono: :notnice:


This one works in the tube b/t the Vortech and TB... THe stage 2 kit uses the MAF voltage to work.


RC
 
I have a stage 2 with the variable boost controller. It goes on @ 4 psi and full spray @ 18 psi. I have the fluid level indicator and the 7 qt tank so it runs out rarely.
You can build your own but I just shelled out the duckies for the Snow.
IMO it was worth every cent I paid for it :nice:
 
I have no dyno #'s with the turbo yet.
You'll be able to get at least 10-15* more timing. With the blower I went from running 10* to 28* WOT. I picked up 18* with the methanol.
I have it one here with the intercooler but don't use it much. I run fine without it on the street and just activate it at the track. If I want to blow someones doors off then I will turn it on and change my tune.
 
94TURBO5 O said:
I have no dyno #'s with the turbo yet.
You'll be able to get at least 10-15* more timing. With the blower I went from running 10* to 28* WOT. I picked up 18* with the methanol.
I have it one here with the intercooler but don't use it much. I run fine without it on the street and just activate it at the track. If I want to blow someones doors off then I will turn it on and change my tune.
Well, remember, I have the TwEECer, so I can run a low timing tune without the Meth and a High timing tune with it.

Question is, How do you know how much timing to add when you have it?

It's not like A/F where you measure it... Is there a set way to find out?

RC