snow performance methanol kit

[spederman]

I am getting one of the methanol injection kits from snow performance. I dont have any clue on which one to pick. I just got a Vortech S trim and am going to run one of these kits instead of an intercooler until i can save up for an intercooler/aftercooler. I'll be running 8psi with a powerpipe so probably seeing around 10psi total.

Does anybody know enough about these to know which one i should get for my setup. I like the idea of the one kit that runs off of the MAF readings and injects the perfect amount of methanol according to boost levels.

http://www.snowperformance.net/products.asp?id=1

 

[damacman]

I use their stage 2 kit with the boost controller. Call Matt and speak to him personally - he'll steer you in the right direction. Two things:

-I'd get a different chip, one that allows you to store multiple tunes, and have your tuner do a safe and agressive tune (to maximize the w/m injection)
-I'd be careful at 10 pounds of boost . . .

 

[BennyBlown2v]

Methanol kits have their advantages and disadvantages... If I were you, I would take the $500 for methanol kit and build your own intercooler kit from parts from eBay, run a search, a few people have had great results!

 

[blackfang]

My Buddy David uses their kit (who is advertised on their site with his 98 Firebird) and likes it with no problems. The car has made 906/975 using their kit and has ran at 25psi on the track.

 

[satanas]

I am getting one of the methanol injection kits from snow performance. I dont have any clue on which one to pick. I just got a Vortech S trim and am going to run one of these kits instead of an intercooler until i can save up for an intercooler/aftercooler. I'll be running 8psi with a powerpipe so probably seeing around 10psi total.

Does anybody know enough about these to know which one i should get for my setup. I like the idea of the one kit that runs off of the MAF readings and injects the perfect amount of methanol according to boost levels.

http://www.snowperformance.net/products.asp?id=1

I was wondering did you end up getting a kit?Im about to purchase one that reads of the maf,But they say its for possitive displacement blowers, I have a centrifugal supercharger.