• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

So how do 4.10's FEEL?

  • Thread starter Thread starter sixstringthing
  • Start date Start date Sep 5, 2004
S

sixstringthing

New Member
Aug 11, 2003
297
0
0
Sep 5, 2004
#1
  • Sep 5, 2004
  • #1
They obviously own 3.73's but my biggest concern, how do they feel at highway speeds? Ive tried driving around 60-65 in 4th to get a feel for it and the engine sounds so loud and stressed, not used to hearing that and not sure if I could get used to it. Also, not sure if it's a fair comparison. Another thing ive been thinking about is all im missing out on is the hard launch in 1st gear... b/c really with 3.27's if you just drive on the highway in 4th gear, isn't that basically the exact thing as driving in 5th with 4.10's? That makes it seem kind of pointless because anytime I want the 4.10 feel I can just shift to a lower gear and I also have the option of shifting into 5th and cruising along quietly. is that about right? Or is it actually a totally different feel?

(note: my car will never see the track so i'm looking at it from a daily driver point of view)
 

Redfire03GT

New Member
Sep 10, 2003
395
0
0
Newark, CA.
Sep 5, 2004
#2
  • Sep 5, 2004
  • #2
It's really hard to explain. Once you've been in a car with different gearing than your own, you'll be able to understand. The car is simply a different animal. It's basically an adjustment of how the car accelerates. You should gain considerable low end pulling while losing a bit on the high end. Which, for some people is ideal, depending on how steep you go.
 

BullittStangV8

Founding Member
Oct 5, 2002
1,104
0
36
NJ
Sep 5, 2004
#3
  • Sep 5, 2004
  • #3
I went with 4.10's, and im still breaking them in. You will have to shift alot around town, and cruising on the highway gives you high higher rpms. 65 mph at the rpms are around 2500 i think. 70 and your at like 3000. I dont remeber the actual numbers, its been a while since i drove the car now that im back at school, and i only drove it for 60 miles since the gear install. However, the pull in each gear is noticably greater. I didnt have to downshift into 4th on the high way to pull past people. Just floor it, and it feels like your in 4th. The change is that noticable. I didnt give it any full throttle blasts in any gear, and i havent gone over 3000 rpms since im still breaking them in. So im really anxious to get home and rip on it.
Mike
p.s i would go with 4.10's unless you drive ont he highway allot, or if you do go on the highway, just stay around 65-70 and it should be o.k. With 4.10's you usually only loose 1-2 mpg.
Mike
 
2

2000BLKGT

Founding Member
May 24, 2001
361
0
0
Toronto
Sep 5, 2004
#4
  • Sep 5, 2004
  • #4
I think the best way to explain it is you feel more "connected" to the car.

You feel like you're much more in control of the car...no accidently drifting her up to 90-100mph in 5th because you were day-dreaming.

In the city...you can litterally drive around in 4th gear if you want.

You let go of the pedal...the car slows...you gas it..she GOES!

You're more "connected"...where ever you want to go...you can drive the car there.

My 3 cents (aka 2 cents CDN)
 

BullittStangV8

Founding Member
Oct 5, 2002
1,104
0
36
NJ
Sep 5, 2004
#5
  • Sep 5, 2004
  • #5
I agree with that as well. The car really does speed up and slow down much more noticably. You let off the gas, and the car noticably slows down quicker.
Mike
 

PDubs

Founding Member
Feb 15, 2002
1,138
0
36
Always farging hot in Texas
Sep 5, 2004
#6
  • Sep 5, 2004
  • #6
4.10s make the car feel like a Mustang should.
 
C

CottonBurnerz

Banned
May 10, 2003
1,554
0
0
Drink and Drive = Teh Lose
Sep 5, 2004
#7
  • Sep 5, 2004
  • #7
it pulls..... hard
 

menasci

Member
Aug 17, 2003
640
1
16
Chandler, AZ
Sep 5, 2004
#8
  • Sep 5, 2004
  • #8
Just drive 1 gear lower than you usually do in the city and hwy and that is what 4.10's are like.

example:

4th gear 3.27's = 5th gear 4.10's
3rd gear 3.27's = 4th gear 4.10's
2nd gear 3.27's = 3rd gear 4.10's
1st gear 3.27's = 2nd gear 4.10's
 
S

stang74

Member
Feb 12, 2004
76
0
6
NV
Sep 5, 2004
#9
  • Sep 5, 2004
  • #9
sixstringthing said:
They obviously own 3.73's but my biggest concern, how do they feel at highway speeds? Ive tried driving around 60-65 in 4th to get a feel for it and the engine sounds so loud and stressed, not used to hearing that and not sure if I could get used to it. Also, not sure if it's a fair comparison. Another thing ive been thinking about is all im missing out on is the hard launch in 1st gear... b/c really with 3.27's if you just drive on the highway in 4th gear, isn't that basically the exact thing as driving in 5th with 4.10's? That makes it seem kind of pointless because anytime I want the 4.10 feel I can just shift to a lower gear and I also have the option of shifting into 5th and cruising along quietly. is that about right? Or is it actually a totally different feel?

(note: my car will never see the track so i'm looking at it from a daily driver point of view)
Click to expand...

I almost didn't get a 4:10 cause I did what you just did, drove on the freeway in 4th gear thinking thats how 5th gear would feel with a 4:10, But thats not the case your RPM on 5th gear w/ a 4:10 is much lower. 5th gear @3K RPM with my 4:10s I'm almost doing 90mph. 2nd gear now feels like in between 1st and 2nd with 3:27...normal driving I start out in 2nd gear..I only use 1st gear during stoplight confrontation or startout 2nd gear if I'm racing a ricer.
 

jrc_03_gt

New Member
Jan 1, 2004
786
3
0
Sep 5, 2004
#10
  • Sep 5, 2004
  • #10
like a rocket
 
S

sixstringthing

New Member
Aug 11, 2003
297
0
0
Sep 5, 2004
#11
  • Sep 5, 2004
  • #11
lol now im starting to want 4.10's again after reading stang74's post.
BTW is starting in second ok with 4.10's? Do you hurt anything, I know i've been told not to do so with 3.27s.
 

crew_dawg16

New Member
Apr 25, 2004
445
0
0
DeKalb, IL
Sep 5, 2004
#12
  • Sep 5, 2004
  • #12
just get the 4.10s, problem is once you have them you wish had gotten 4.30s. Seriously, If I ever buy another stang, this will the first mod.
 

Ruckus46Gt

Member
Nov 26, 2003
385
0
16
Long Island
Sep 5, 2004
#13
  • Sep 5, 2004
  • #13
yea i would say 4.10s all the way everything they have said is true. You'll run about the same in the 1/4 depending on driver (.1-.2 quicker) and i've lined up with cars that have 3.27 and 3.73's and off the line you pull hard on them and they people with the 3.73s are like wtf how did you do that
 
S

stang74

Member
Feb 12, 2004
76
0
6
NV
Sep 6, 2004
#14
  • Sep 6, 2004
  • #14
sixstringthing said:
lol now im starting to want 4.10's again after reading stang74's post.
BTW is starting in second ok with 4.10's? Do you hurt anything, I know i've been told not to do so with 3.27s.
Click to expand...

It shouldn't hurt anything, it's only bad if you stay on the clutch longer than you should..with the 4:10 starting from 2nd gear, I let go the clutch and barely give it gas and the car just goes. You can skip shift without bogging the engine as in shifting from 1st to 3rd or starting in 2nd to 4th.. what I like the most about this gear is you can just leave it on 1st gear, floor it before you know it your cooking the rear tires..get it already!
 
You must log in or register to reply here.

Similar threads

P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
315
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
750
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
620
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
617
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
599
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?