• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

So i spun my balancer off today...

  • Thread starter Thread starter Tally_4.6
  • Start date Start date Nov 19, 2008
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

Tally_4.6

Member
Feb 26, 2006
195
0
17
Orlando
Nov 19, 2008
#1
  • Nov 19, 2008
  • #1
Today leaving the school parking lot i got on it for a second and right as i let off i see what looks like a pulley shoot out from under my car and into the grass. It shocked me for a minute but i didn't hear any weird noises or my car do anything funny so i naturally thought it was sitting in the road and ran it over with that being the reaction. I then proceeded to race a dude in class with a camaro which hopefully didn't do any damage but thats beside the point. When i got home i popped the hood and my jaw dropped, a lot of cussing ensued as well. So the pulley is still there but obviously the balancer is sitting in the grass at school. I've been looking for replacements or underdrive sets, lemme know what you guys think or have on your car. Hopefully none of these require an aftermarket belt, i just put a new one on recently.

Trick Flow Specialties TFS-34002 - Trick Flow® Underdrive Aluminum Pulley Kits - summitracing.com

March Performance 2250 - March Performance 4.6L Ford Pulley Kits - summitracing.com
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Nov 19, 2008
#2
  • Nov 19, 2008
  • #2
it wouldnt run for long without overheating with no balancer. your belt would be off and you wouldnt have any of your accessories.

post some pics so i can see what your problem is
 

Pearl02

Member
Nov 27, 2004
496
0
16
Kansas City
Nov 19, 2008
#3
  • Nov 19, 2008
  • #3
Tally_4.6 said:
Today leaving the school parking lot i got on it for a second and right as i let off i see what looks like a pulley shoot out from under my car and into the grass. It shocked me for a minute but i didn't hear any weird noises or my car do anything funny so i naturally thought it was sitting in the road and ran it over with that being the reaction. I then proceeded to race a dude in class with a camaro which hopefully didn't do any damage but thats beside the point. When i got home i popped the hood and my jaw dropped, a lot of cussing ensued as well. So the pulley is still there but obviously the balancer is sitting in the grass at school. I've been looking for replacements or underdrive sets, lemme know what you guys think or have on your car. Hopefully none of these require an aftermarket belt, i just put a new one on recently.

Trick Flow Specialties TFS-34002 - Trick Flow® Underdrive Aluminum Pulley Kits - summitracing.com

March Performance 2250 - March Performance 4.6L Ford Pulley Kits - summitracing.com
Click to expand...

I wouldn't get any of those "piggy" back style pulleys. Steeda make a pretty good one. Pearl02.
 

Green&GoldGT

Member
Aug 1, 2005
302
0
17
Virginia
Nov 20, 2008
#4
  • Nov 20, 2008
  • #4
SaleenGT2001 said:
it wouldnt run for long without overheating with no balancer. your belt would be off and you wouldnt have any of your accessories.

post some pics so i can see what your problem is
Click to expand...

I'm pretty sure he has a piggyback style crank pulley now, and the balancer mounted to it flew off.

Get some pulleys with an integrated SFI balancer. Most companies already sell sets with the balancer, but most go with Steeda.
 

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!
Founding Member
Nov 29, 1999
5,520
1,291
224
H Town
Nov 20, 2008
#5
  • Nov 20, 2008
  • #5
I agree, get a good set of pulleys

probably karma for street racing.
 

Rusty67

20+ Year Stangneter
Dec 3, 2002
3,749
37
109
LA, CA
Nov 20, 2008
#6
  • Nov 20, 2008
  • #6
Stay away from that piggyback garbage. My dad had a BBK piggyback style under drive kit. His engine started to knock and ping. We replaced the piggyback crank pully with a March under drive full replacement piece and the engine started to run properly again.

I've had nothing but good exeriences with March. I've used their stuff on multiple cars and never had a problem.
 

Tally_4.6

Member
Feb 26, 2006
195
0
17
Orlando
Nov 20, 2008
#7
  • Nov 20, 2008
  • #7
I raced the guy after this happened, but it doesn't matter. I'll throw up some pics when i get home today 'cause i don't think you guys are getting it, all my pullies are stock. I might go with that Steeda kit, even tho money is ****in tight!
 

Stark77

Member
Jun 11, 2008
501
0
16
Tallahassee, FL
Nov 20, 2008
#8
  • Nov 20, 2008
  • #8
Racing in tallahassee = bad idea. Those are the most poorly maintained streets I've ever driven on. I went to FSU for my undergrad several years back. Potholes, awful curbs, drunk drivers galore, foolish drivers, etc. If you're going to thrash you car, take it to the track in Panama City or Jax. Both are only about 2 hours away. My buddy's roommate, back in college, got a very hefty ticket and had his car impounded for street racing. Those police there LOVE writing tickets for anything, I received three myself in my 4 year stay.
 

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Nov 20, 2008
#9
  • Nov 20, 2008
  • #9
Only kids street race. Not trying to be rude, but its agains the law for a reason(dangerous to other let alone yourself). So are you saying that the balancer cracked and broke and the weight on the outside flew off?
 

Badloser

New Member
Jan 4, 2006
8
0
0
Port St Lucie,Fl
Nov 20, 2008
#10
  • Nov 20, 2008
  • #10
was there a vibration a few days before this happened?
 

Tally_4.6

Member
Feb 26, 2006
195
0
17
Orlando
Nov 21, 2008
#11
  • Nov 21, 2008
  • #11
Would you guys forget the street racing part, that had no bearing on this whatsoever 'cause "damage" happened beforehand.

I need to hurry up and post pics, hopefully tomorrow i will. The balancer part flew off, but obviously the crank pulley is still there cause i drove it home no problem. I guess the rubber gave way cause of its age after i applied a little torque to it.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Nov 21, 2008
#12
  • Nov 21, 2008
  • #12
Don't drive your car or even turn it on, or you may be making a post about your oil pump going out next.

Fragile stock pump - balancer = internal vibrations = broken pump = death of engine = rage = driving car off cliff = no cliffs in FL. but the ocean will do... get my point?

 

forum155pl

New Member
Jul 11, 2006
520
0
0
the 509
Nov 22, 2008
#13
  • Nov 22, 2008
  • #13
you didnt notice the lack of power brakes and power steering on the way home?

sounds like you busted the keyway out and spun the balancer off!.. thats insane, good thing your motor loves you
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Nov 22, 2008
#14
  • Nov 22, 2008
  • #14
Tally_4.6 said:
Would you guys forget the street racing part, that had no bearing on this whatsoever 'cause "damage" happened beforehand.
Click to expand...

Agreed. Lets stay on topic people.
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Nov 22, 2008
#15
  • Nov 22, 2008
  • #15
i want to see a pic of this, how did the balencer come off, and the belt still be on on my buddy 96 his stock pully/balancer is one peice, and its STEEL.......
 

SRT Handz

I tripped & fell down and cut myself & got blood
Oct 10, 2004
941
23
19
La Mirada, CA
Nov 22, 2008
#16
  • Nov 22, 2008
  • #16
if the keyway on the crack in damaged then so is the motor
 

fast97gt

Active Member
Jan 2, 2007
1,082
2
49
north carolina
Nov 22, 2008
#17
  • Nov 22, 2008
  • #17
Gearbanger 101 said:
Agreed. Lets stay on topic people.
Click to expand...

well for one that was part of the topic, and for two it's illegal to street race. yes i used to do it when i was 16 but im 27 know, i watced a buddy of mine hit a car and killed the 12yr. old boy in the back seat. so dont do it. its not worth the time, or punishment.

p.s. i wasnt racin him, he was racing another guy.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Nov 22, 2008
#18
  • Nov 22, 2008
  • #18
forum155pl said:
you didnt notice the lack of power brakes and power steering on the way home?

sounds like you busted the keyway out and spun the balancer off!.. thats insane, good thing your motor loves you
Click to expand...

If i'm not mistaken, the piggyback pully sits where the balancer is, and then the balancer attaches to the front side of the piggyback pully.

That way the belt is still lined up, but it is riding on the piggyback pully instead of the balancer.

So the balancer flew off, but the piggyback was still on as well as the belt.
 

Tally_4.6

Member
Feb 26, 2006
195
0
17
Orlando
Nov 22, 2008
#19
  • Nov 22, 2008
  • #19
This is hilarious, the area in red which is the outer part of the pulley separated by injected rubber actually slung off. I'm guessing cause of age and the rubber being dried up and cracked. I guess the belt somehow came back on using the tensioner, but i drove home no problem.

View attachment 289200
 

fast97gt

Active Member
Jan 2, 2007
1,082
2
49
north carolina
Nov 23, 2008
#20
  • Nov 23, 2008
  • #20
Tally_4.6 said:
This is hilarious, the area in red which is the outer part of the pulley separated by injected rubber actually slung off. I'm guessing cause of age and the rubber being dried up and cracked. I guess the belt somehow came back on using the tensioner, but i drove home no problem.

View attachment 289166
Click to expand...

wow ive only seen that with aftermarket dampers that freakin crazy
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
72
The Welcome Wagon Jul 3, 2026
5150K
5
B
Where to go from here on my build…
  • B0udreaux
  • Tuesday at 3:59 PM
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
150
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:05 PM
AeroCoupe
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
497
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2025
from6to8
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
852
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?