So it has begun ( turbo build up )

I don't want the problem with the exhuast or headers cracking from all that weight hanging soley from the tubing. I'm going to make solid motor mounts out of the stock rubber units and see what happens. The turbo is actually only solidly fixed to the firewall.

No pictures for now as all the things I did yesterday aren't really picture worthy. I finished the wiring and loomed it in aluminum shielding. Cell is back in. The oil return line is re-attached. Idler arm is retightened. Tranny cooler is DONE, finally to include cooling lines. Fuel return is buttoned up, and not hanging anymore. JUst need to find a BOV. Think I am going with a Tial 50mm, nice and quite.

Went to fire it today. Went to anyways. The MSD is prollay fried and I have no idea why. was working fine when I put her down a few months ago. The switch lead has power to it, and the batt cable is run to a block of power. And the neg goes to a common ground. Eveything else goes to the same two points for the ground and pos. And everything else is working. I tried jump the magnetic leads and nothin. But I have to go to dinner right now because it's my anniversary. So I can't change boxes or anything tonight. Somebody drown my sorrows for my while I get drug out to dinner.
I couldn't have even reved it up yet. I I just wanted to hear it run. I don't have my BOV yet, so the coldside isn't altogether and I don't want to over spin the turbo. But the company I bought the BOV from told me it would go out last tues, because I ordered it on that monday. Here it is the following Monday, and they just "F"ing sent it out. Gotta love internet companies. I called this company because they were supposed to have a good rep. They made the sticker to ship out on Wed of last week, but they said the UPS didn't show up until today. Why didn't they call them for those otherdays rather than waiting ? So close, and this small sh!!t is really starting to irritate.

IT LIVES !!!!! Well, kinda. Still haven't got my BOV. Which just pisses me off to no end. The thinghas a hard time idling. But I'll check the wires, and re-gap. seems almost like a vacuum leak. We'll see. It was a little late and dark to try to do much. The idle mixture screws for some reason were way to far out. The box ended up being fine. It's just a bad ground or pos. lead. I just hooked the jumpers straight to the + side of the soleniod and straight to where I have the box grounded. But, I won. So far, I got to hear it start. Now I definetly have the motivation to keep going.