Some axle and leafs pics

[67Thunder]

The bottom link on this page will show you what I've been up to. Glad to get the 9" together and hung

 

[HistoricMustang]

The bottom link on this page will show you what I've been up to. Glad to get the 9" together and hung

Very nice and I simply love the concrete blocks! Keep us posted.

HistoricMustang
www.historicmustang.com

 

[rhyno9]

The bottom link on this page will show you what I've been up to. Glad to get the 9" together and hung

What brand subframe connectors are those?

 

[NasaGT]

All that nice clean paint is purty

 

[68restoman]

Looks nice, I'm getting ready to do something similar with my 68. Did you have to use special bearings/seals to fit the 31 spline axles into the small bearing housing? I also plan on ordering all my stuff from Summit, if you can share any part numbers it'd be much appreciated...

Thanks!

68Restoman

 

[67Thunder]

Looks nice, I'm getting ready to do something similar with my 68. Did you have to use special bearings/seals to fit the 31 spline axles into the small bearing housing? I also plan on ordering all my stuff from Summit, if you can share any part numbers it'd be much appreciated...

Thanks!

68Restoman

I used the superior axles (recommended to me by a fellow stangnet member)

I ordered the Heavy Duty axle retainers from summit, and studs. I left the bearings and seals to the local guys here at http://www.iwerearendsonly.com/ .

The wheel studs i got from summit were wrong, so I am glad I went with my intuition and let the experts deal with the bearing sizes.

I was told by rear ends only to leave the axle seals in the housing, so it was easier for them to match them (I have a '69 housing)

The bearings are common as even 31 spline mustangs used the small axle ends.

 

[67Thunder]

What brand subframe connectors are those?

from canadian mustang / american pony