• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Spark, Fuel but won't start

  • Thread starter Thread starter enpyochum@msn.c
  • Start date Start date Aug 6, 2007
E

enpyochum@msn.c

New Member
Aug 6, 2007
0
0
0
Aug 6, 2007
#1
  • Aug 6, 2007
  • #1
Ok I just bought a 91, 2.3l. The previous owner said it got to where it would die at and idle once in a while then start back up. Then finally it wouldn't start at all.
IT has a DIS with 8 plugs. There is good spark.
There is also good fuel pressure at the rails but the plugs are not getting wet. The timing belt is good. I cannot find the timing marks on the crank.
I took the AIC valve off and cleaned it. It looked good.
What tells the injectors when to fire??
I tried unplugging the MAF, no change.
STUMPED!
 

sleeper_inc

New Member
May 3, 2007
92
0
0
Regina Beach Sask. Canada
Aug 6, 2007
#2
  • Aug 6, 2007
  • #2
enpyochum@msn.c said:
Ok I just bought a 91, 2.3l. The previous owner said it got to where it would die at and idle once in a while then start back up. Then finally it wouldn't start at all.
IT has a DIS with 8 plugs. There is good spark.
There is also good fuel pressure at the rails but the plugs are not getting wet. The timing belt is good. I cannot find the timing marks on the crank.
I took the AIC valve off and cleaned it. It looked good.
What tells the injectors when to fire??
I tried unplugging the MAF, no change.
STUMPED!
Click to expand...
The computer
 
4

4bangin

New Member
Jan 2, 2005
1
0
0
Aug 6, 2007
#3
  • Aug 6, 2007
  • #3
enpyochum@msn.c said:
Ok I just bought a 91, 2.3l. The previous owner said it got to where it would die at and idle once in a while then start back up. Then finally it wouldn't start at all.
IT has a DIS with 8 plugs. There is good spark.
There is also good fuel pressure at the rails but the plugs are not getting wet. The timing belt is good. I cannot find the timing marks on the crank.
I took the AIC valve off and cleaned it. It looked good.
What tells the injectors when to fire??
I tried unplugging the MAF, no change.
STUMPED!
Click to expand...
does it start and die every time? if you start it and step on the pedal will it stay on until you let off? if you do get it to actualy move will it die at a stop? might be a bad MAP sensor.
 
You must log in or register to reply here.

Similar threads

M
Bad starter?
  • mason5.0
  • Oct 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
251
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2026
General karthief
F
1986 mustang no start
  • foxyjamss221
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
423
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2025
foxyjamss221
F
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
520
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
Engine New factory manifold no start
  • Fishnchips
  • Oct 15, 2026
  • 1994 - 1995 Specific Tech
Replies
13
Views
415
1994 - 1995 Specific Tech Oct 22, 2026
DadLife0724
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
598
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?