Spartan Lambda Controller 2

Blown88GT

Founding Member

Nov 13, 1999

2,281

522

164

Palm Beach Gardens, FL

Apr 23, 2020

#1

• Apr 23, 2020

• #1

It is not clear how to connect the Megasquirt & a separate dedicated gauge.
He says:
Spartan 2 is equipped with both an analog Linear Output and Simulated Narrowband Output that is compatible with most gauges, ECUs, dataloggers, etc.
I don't know what this means: "Simulated Narrowband Output that is compatible with most gauges."

This is the gauge, analog only input with digital readout.

Shop All

www.innovatemotorsports.com

 

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Apr 23, 2020

#2

• Apr 23, 2020

• #2

The gauge and the MS will share the 0-5v signal

 

Blown88GT

Founding Member

Nov 13, 1999

2,281

522

164

Palm Beach Gardens, FL

Apr 24, 2020

#3

• Apr 24, 2020

• #3

Wasn't sure they could share, since the LC2 has separate analog outputs.
Got the LC2 to work again by "Calibration in free air" procedure.

 

C

Chrisgev

New Member

Aug 17, 2020

1

0

1

Michigan

Aug 17, 2020

#4

• Aug 17, 2020

• #4

I have a 2004 saleen mustang I'm getting readings of 10afr on the driver side and 13.8afr on the passenger. Any ideas on what could cause this?

 

93Stang5oh

Founding Member

Jul 8, 1999

266

3

19

Manchester, Iowa

Aug 18, 2020

#5

• Aug 18, 2020

• #5

Possibly a bad O2 Sensor, have you tried swapping the sensors from side to side to see if the reading follows the sensor?