speed density question

[gt40_2003wes]

if i get a cam and it aint a sppeed density cam will my car have problems running?

 

[RsStanG1987]

shouldnt. But it all depends on the cam.

 

[gt40_2003wes]

i was thinking bout the e303 will it have probs with this cam?

 

[RsStanG1987]

You may have to adjust the Idle. Your car is mass air right?

 

[gt40_2003wes]

no speed density

 

[emagdnim]

the e303 will give you problems , go with a comp cams or crowler with a 114 lsa and your good to go. The e303 isnt that good of a cam theres much better out there that work with SD. Even the comp cams XE270HR works good with SD. Im running the nx264 and it runs great.

 

[Daggar]

E cams do not run particularly well with SD without a custom tune. It's getting harder and harder to find places that are able to burn a chip for SD computers. The hardware is still out there... it's the software for Ford SD EECs that's difficult to find.

 

[gt40_2003wes]

ok are there anything else that will cause my car to have fits besides the cam?

 

[emagdnim]

Any injectors larger then 24 will give you problems , You will also need a afpr .

 

[gt40_2003wes]

yea i was plannin on orderin a fuel pressure regulator when i order a cam.will the trick flow stage one work good with my sd?

 

[emagdnim]

Can you paste the specs of it?

 

[gt40_2003wes]

not sure on the specs but ill try to find em shouldnt be to hard.

 

[87gtconv]

I am planning on leaving my cam and heads alone and just going with 1.7 Cobra RR, new valve springs, a Cobra intake with a 65mm TB and leaving the injectors at 19 lbs. Any thoughts?? Yes, I am still SD.

 

[POWER302]

Your car is mass air right?

Did you even read the topic before you clicked on this thread?

 

[2002BLGT]

trickflow stage one wont work well

 

[87'GTstang]

Keep the LSA around 114* (stock cam is 115* btw) and the keep the duration smallish (something around 260* advertised or so) and it will be a hit or miss with the valve lift selection. Seriously, just do what thousands of other 87' and 88' stang owners have done and convert to mass air - it opens a whole new door in the light of "what do I want to do next?" instead of "what can I do?".