SROD

M

mercurycapri

Member

May 30, 2006

211

2

18

washington

Nov 11, 2006

#1

• Nov 11, 2006

• #1

I was just wondering if anyone know's the gear ratio and how much torque the SROD 4 speed manual trans can handle. Im needing a stronger tranny than my T 5 because of 351 windsor swap. thanks

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

80

Dublin GA

lowendmac.com

Nov 11, 2006

#2

• Nov 11, 2006

• #2

A Tremec 3550 or TKO is a bolt up to your SROD bellhousing. The 3550 takes the standard Mustang clutch assembly, while the TKO uses a 26 spline chevy clutch disk. The TKO also uses a different yoke on the driveshaft end. I have a Tremec 3550 and it is bullet proof as long as you don't do things like let it run low on lubricant or try shifting without the clutch.

 

8

8950HO

New Member

Mar 31, 2005

658

2

0

Nov 11, 2006

#3

• Nov 11, 2006

• #3

I don`t know how much torque an SROD can handle,but they suck for performance use.4th gear is overdrive in an SROD.

Here`s the ratios...

1st-3.07
2nd-1.72
3rd-1.00
4th-.70
Reverse-3.07

 

M

mercurycapri

Member

May 30, 2006

211

2

18

washington

Nov 11, 2006

#4

• Nov 11, 2006

• #4

I might have to go with a c 6 automatic to handle the power until I can afford a good manual tranny. I thought some one while back said the srod will hold 300 torque

 

8

8950HO

New Member

Mar 31, 2005

658

2

0

Nov 11, 2006

#5

• Nov 11, 2006

• #5

C-6`s rob a lot of horsepower.
Most guy`s use the C-4 instead or AOD`s.

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

members.rankmyride.com

Nov 11, 2006

#6

• Nov 11, 2006

• #6

IIRC, the SROD can handle even less than the T5. When they were in fox's, 150HP was a lot

 

Cwalk

New Member

Sep 25, 2006

78

0

0

Virginia Beach, Va

Nov 13, 2006

#7

• Nov 13, 2006

• #7

Get a TKO or 3550.