• Community Forums
  • Regional Forums and Event Information

North East SSoM Members!!!

  • Thread starter Thread starter whitehorseupnorth
  • Start date Start date Oct 20, 2003
Prev
  • 1
  • …
  • 465
  • 466
  • 467
  • 468
  • 469
  • …
  • 1056
Next
First Prev 467 of 1056 Next Last

BadVoodoo

Founding Member
Aug 25, 2002
1,552
1
39
Belgrade
Sep 4, 2005
#9,321
  • Sep 4, 2005
  • #9,321
Line lock install went good, but it was not as easy as it should have been. Getting to some of the nuts underneath the master cylinder was a PITA. Chris actually put the thing on for me, and did a really nice job We thought we were done, but the pedal feel was soft as a mofo. Chris ran inside and did a search on SVT Performance, turned out we only needed to bleed some more air out of the master cylinder. The line lock really works slick, and I left some nice black marks on Chris' road to prove it.

Thanks Chris, you did a nice job bro !!
 

BadVoodoo

Founding Member
Aug 25, 2002
1,552
1
39
Belgrade
Sep 4, 2005
#9,322
  • Sep 4, 2005
  • #9,322
DoubleONegative said:
I am seriously considering one of these little guys
Billet flow IRS Brace/Girdle


in an attempt to avoid this
Click to expand...


Without a doubt, buy one!!! Same thing that I have on my car, and it's a very sturdy, well made piece with some BIG azz m'f'n bolts!!
 

whitehorseupnorth

SSoM President
Founding Member
Sep 9, 2000
1,772
0
36
Maine
Sep 4, 2005
#9,323
  • Sep 4, 2005
  • #9,323
Badstang00 said:
Thanks Chris, you did a nice job bro !!
Click to expand...

No problem, man...
 

FEARNO1

Founding Member
Sep 1, 2002
1,241
1
39
Maine
Sep 4, 2005
#9,324
  • Sep 4, 2005
  • #9,324
Dan_Soprano said:
You on AOL Fred???
Click to expand...


Yes
 

FEARNO1

Founding Member
Sep 1, 2002
1,241
1
39
Maine
Sep 4, 2005
#9,325
  • Sep 4, 2005
  • #9,325
DoubleONegative said:
Fred, have you found any good shops down there yet???
Click to expand...

I think so. I'll let you know for sure when all my parts get here and I get her tuned
 

gaslight

Founding Member
Jul 12, 2000
3,365
16
99
Maine
Sep 4, 2005
#9,326
  • Sep 4, 2005
  • #9,326
Dan_Soprano said:
there are NO hot chicks in Maine............
Click to expand...
You saying something about my wife? Or Chris'? Remember your old lady is here too jackoff.
 

gaslight

Founding Member
Jul 12, 2000
3,365
16
99
Maine
Sep 4, 2005
#9,327
  • Sep 4, 2005
  • #9,327
DoubleONegative said:
I am seriously considering one of these little guys
Billet flow IRS Brace/Girdle


in an attempt to avoid this
Click to expand...
Do you even make enough power to worry about that braking.
 

gaslight

Founding Member
Jul 12, 2000
3,365
16
99
Maine
Sep 4, 2005
#9,328
  • Sep 4, 2005
  • #9,328
sorry had to leave last night. My headache was just getting worse. I thought I was going to puke on the way home. I got home and took a shower then just went straight to bed. Massive Migraine.
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Sep 4, 2005
#9,329
  • Sep 4, 2005
  • #9,329
gaslight said:
sorry had to leave last night. My headache was just getting worse. I thought I was going to puke on the way home. I got home and took a shower then just went straight to bed. Massive Migraine.
Click to expand...
quit being a PUS!
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Sep 4, 2005
#9,330
  • Sep 4, 2005
  • #9,330
gaslight said:
sorry had to leave last night. My headache was just getting worse. I thought I was going to puke on the way home. I got home and took a shower then just went straight to bed. Massive Migraine.
Click to expand...


I used to get those so I know where you are comming from.
 

gaslight

Founding Member
Jul 12, 2000
3,365
16
99
Maine
Sep 4, 2005
#9,331
  • Sep 4, 2005
  • #9,331
I just laid in bed with a cool wet wash cloth over my eyes. I hate getting headaches that are that bad.
Woke up at 2am listening to the neighbor jumping in his pool and making a bunch of noise. The mood I was in I wanted to beat him over the head with a bat. I just closed the window and turned on the AC instead. I would like to take a dump in his pool.
 

DoubleONegative

Active Member
Jun 30, 2003
1,528
2
39
Tioga Cty PA
Sep 4, 2005
#9,332
  • Sep 4, 2005
  • #9,332
if you are getting headaches that bad on a regular basis you may wanna see a doctor bro
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Sep 4, 2005
#9,333
  • Sep 4, 2005
  • #9,333
gaslight said:
I would like to take a dump in his pool.
Click to expand...
DO IT!!!!!
 

BadVoodoo

Founding Member
Aug 25, 2002
1,552
1
39
Belgrade
Sep 4, 2005
#9,334
  • Sep 4, 2005
  • #9,334
Yes Bryan, you should take a dump in his pool

I think I may have found a problem with my shifter(besides me). I figured I would raise the shifter height so I would not have to reach so far to shift. When I went to loosen the 2 bolts, they were both loose as a mofo! This may be why it has felt so "sloppy" lately, but I am not sure. Anyways, I repositioned it to the higher setting, and tightened it like Travis' lips suck starting his bike . I am trading off a shorter throw for more leverage and an easier to reach shifter.

Another lesson learned by me today is this; CLEAN THE TOOTSIE ROLLS OFF YOU REAR QUARTER PANEL ASAP AFTER A NIGHT AT THE TRACK!!! I left the $hit on my car for 2 weeks, and it was a serious PITA to get it all off!! Polished my car for the first time this year earlier today. Should stay clean for atleast a few days hopefully. Using the clay bar works greatgyts. any of you tried it out?
 

cold96snake

20+ Year Stangneter
Jan 26, 2004
817
1
39
Truly, out to sea
Sep 4, 2005
#9,335
  • Sep 4, 2005
  • #9,335
Badstang00 said:
Yes Bryan, you should take a dump in his pool

I think I may have found a problem with my shifter(besides me). I figured I would raise the shifter height so I would not have to reach so far to shift. When I went to loosen the 2 bolts, they were both loose as a mofo! This may be why it has felt so "sloppy" lately, but I am not sure. Anyways, I repositioned it to the higher setting, and tightened it like Travis' lips suck starting his bike . I am trading off a shorter throw for more leverage and an easier to reach shifter.

Another lesson learned by me today is this; CLEAN THE TOOTSIE ROLLS OFF YOU REAR QUARTER PANEL ASAP AFTER A NIGHT AT THE TRACK!!! I left the $hit on my car for 2 weeks, and it was a serious PITA to get it all off!! Polished my car for the first time this year earlier today. Should stay clean for atleast a few days hopefully. Using the clay bar works greatgyts. any of you tried it out?
Click to expand...
I third the motion for a poo in the pool.

Looks like we spent the afternoon doing the same thing. I claybarred, too. Then slapped some superwhite onto the primer spot. Looks more like off white up close, but not bad from a distance. Super white is not the same as ultra crystal arctic premium whatever white I have. Will be cleaning wax and detailing tomorrow. Maybe I'll go to windham.
 

cold96snake

20+ Year Stangneter
Jan 26, 2004
817
1
39
Truly, out to sea
Sep 4, 2005
#9,336
  • Sep 4, 2005
  • #9,336
whitehorseupnorth said:
No problem, man...
Click to expand...
Thanks from me, too. Hope I didn't wake you this morning.
Tell Vinny that car would be alot of fun out here on the island. We have plenty of dirt roads.
 

cold96snake

20+ Year Stangneter
Jan 26, 2004
817
1
39
Truly, out to sea
Sep 4, 2005
#9,337
  • Sep 4, 2005
  • #9,337
DoubleONegative said:
if you are getting headaches that bad on a regular basis you may wanna see a doctor bro
Click to expand...
Poo on the Drs.
 

cold96snake

20+ Year Stangneter
Jan 26, 2004
817
1
39
Truly, out to sea
Sep 4, 2005
#9,338
  • Sep 4, 2005
  • #9,338
poo
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Sep 4, 2005
#9,339
  • Sep 4, 2005
  • #9,339
there's alot of poo in here.........
 

cold96snake

20+ Year Stangneter
Jan 26, 2004
817
1
39
Truly, out to sea
Sep 4, 2005
#9,340
  • Sep 4, 2005
  • #9,340
I poo'ed at Chris', at a gas station, and at the ferry terminal today.
 
Prev
  • 1
  • …
  • 465
  • 466
  • 467
  • 468
  • 469
  • …
  • 1056
Next
First Prev 467 of 1056 Next Last
You must log in or register to reply here.

Similar threads

M
Too much for me to repair in my current housing situation
  • My Drama Magnet 04 Gt
  • Apr 1, 2026
  • The Welcome Wagon
Replies
8
Views
390
The Welcome Wagon Apr 14, 2026
Noobz347
J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
166
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
WTB 89 Hatchback interior trim - any color
  • Zero_chance
  • Jun 14, 2026
  • Want to Buy
Replies
2
Views
155
Want to Buy Jun 14, 2026
Noobz347
P
rear Impact absorbers.
  • Praetorious
  • May 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
204
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2026
Praetorious
P
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
473
Other Auto Tech Mar 3, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Community Forums
  • Regional Forums and Event Information
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?