North East SSoM Members!!!

[BadVoodoo]

Swweet, I have the first two pages of the year, ho's.

 

[Venom351R]

With my 3.5" pulley, I am at about 15psi, and with my new 3.20" pulley, I should see17-18psi. Horsepower will take a jump, but tq. should really pick up a lot.

so 18PSI and over 550RWHP do plan on finally breaking out of the 11's

 

[BadVoodoo]

I will do my very best to get kicked off the track, but hell, that could be an 11.49 pass . And BTW, it will be over 600rwhp

 

[Venom351R]

I will do my very best to get kicked off the track, but hell, that could be an 11.49 pass . And BTW, it will be over 600rwhp

you better be breaking 11.50's then

How did you like that drop kick by flutie.... pretty sweet huh.

 

[BadVoodoo]

The next mods on my list will be these. The clutch kit will sit around until my current one is total toast though...

 

[whitehorseupnorth]

I could of swarn I saw 17 psi when we were at the dyno last. Good luck, see what happens.

 

[whitehorseupnorth]

Hey, theres a spec 3 clutch disc mixed in with the Centerforce stuff. I forgot to tell you Mike that I talked with a guy interested in my car and he has an 03 cobra. He said, to go with the dual disc setup. Says it works awesome...

 

[BadVoodoo]

I could of swarn I saw 17 psi when we were at the dyno last. Good luck, see what happens.

You very well may have seen 17psi. The pulley is rated at 15psi by Kenne Bell however.

 

[Dan_Soprano]

Performance Dyno finally has a new site, as well as a message board. I think I am going to let them tune my car this spring when I turn up the boost.

nice! Let's go together in march or april!!

 

[FEARNO1]

nice! Let's go together in march or april!!

 

[FEARNO1]

I think Travis and Chris should settle this like men..........IN THE OCTAGON!!!

http://tamparacing.com/forums/attachment.php?attachmentid=55160

 

[Dan_Soprano]

Hey Trav.....how about them Pats today!!!!!!!!!!!!

 

[BadVoodoo]

nice! Let's go together in march or april!!

Sounds like a plan. Do you plan on getting a SCT Excalibrator2?

 

[Dan_Soprano]

Sounds like a plan. Do you plan on getting a SCT Excalibrator2?

yes sir!

 

[BadVoodoo]

Ditto. I am gonna put my predator on EBAY. Isn't that how you sold yours?

 

[Dan_Soprano]

Ditto. I am gonna put my predator on EBAY. Isn't that how you sold yours?

yes sir........I plan on getting the X2 some time soon. All I have left to get is the 17# pulley,and the X2, then I am mod complete. I have the 60#ers, SCT MAF, 2 new rims, 4 new tires, MGW, and midpipe (backordered but paid for) ready to go. I am really not looking forward to pulling the blower back off to change injectors. such a pain in the ass. I wish KB did the whole removable plenum thing to make it easier. Oh well. Don't plan on doing the install till march when it [hopefully] warms up.

 

[whitehorseupnorth]

Had to turn down another offer on the stang.. Am I crazy?? I just don't know what it's worth. I think ebay will be my best bet. Hopefully when I'am ready to buy another, HP will have a turbo kit for the car.....

 

[Dan_Soprano]

Had to turn down another offer on the stang.. Am I crazy?? I just don't know what it's worth. I think ebay will be my best bet. Hopefully when I'am ready to buy another, HP will have a turbo kit for the car.....

make sure you set the reserve high on it........

 

[Venom351R]

Dan..

Your boys in blue going to win next weekend? Tough call on that one not sure who Im picking.

 

[Venom351R]

Had to turn down another offer on the stang.. Am I crazy?? I just don't know what it's worth. I think ebay will be my best bet. Hopefully when I'am ready to buy another, HP will have a turbo kit for the car.....

how much was the offer.