North East SSoM Members!!!

cyazo6 said:
Dan what have you done to cobra for mods. Kenne Bell right, how much boost?
KB 2.2, was 13# will be 17 here in a month or so when I get around to pulling the blower back off and changing the injectors. Other mods are Prochamber, magnaflow catback, MGW shifter, K&N FIPK, Billetflow 90mm Idler, MM Subframes (waiting to get welded in), and SCT X2 tuned by James @ RWTD. Hope to be somewhere between 580 and 600hp at the wheels first dyno this spring.
 
Dan_Soprano said:
KB 2.2, was 13# will be 17 here in a month or so when I get around to pulling the blower back off and changing the injectors. Other mods are Prochamber, magnaflow catback, MGW shifter, K&N FIPK, Billetflow 90mm Idler, MM Subframes (waiting to get welded in), and SCT X2 tuned by James @ RWTD. Hope to be somewhere between 580 and 600hp at the wheels first dyno this spring.


:jaw:
 
Dan_Soprano said:
KB 2.2, was 13# will be 17 here in a month or so when I get around to pulling the blower back off and changing the injectors. Other mods are Prochamber, magnaflow catback, MGW shifter, K&N FIPK, Billetflow 90mm Idler, MM Subframes (waiting to get welded in), and SCT X2 tuned by James @ RWTD. Hope to be somewhere between 580 and 600hp at the wheels first dyno this spring.


I might be putting a whipple on mine soon...was told I would be cut a hell of a deal and he has 2 sitting around........
 
No dildos!

Just a Raptor shift light, Rear strut tower brace, New idler pullies and a Different guage pod. Nothing difficult really.

Getting my subs welded in next month along with the Line Lock install. The only thing i will have left will be the gears and bushings...gonna have Herman do that along with a set of his Anti-hop shocks and most likely H&R Sport Springs
 
Dan_Soprano said:
KB 2.2, was 13# will be 17 here in a month or so when I get around to pulling the blower back off and changing the injectors. Other mods are Prochamber, magnaflow catback, MGW shifter, K&N FIPK, Billetflow 90mm Idler, MM Subframes (waiting to get welded in), and SCT X2 tuned by James @ RWTD. Hope to be somewhere between 580 and 600hp at the wheels first dyno this spring.
nice mods and #'s I'd lito see 500-525 from mine
 
cyazo6 said:
I wear a jacket, but hate the helmet. They don't look right on a HD any way and the half helmets are retarded


Having your brains splatterd on the side of the road doesnt look to right either.

Helmet saved my uncle's life on his CBR 900RR and Id never think of going anywhere without one on. I try to protect myself as much as I can, Its a dangerous hobby but all you can do is try and protect yourself the best you can. If you ever happen to get into a situation and you dont have a helmet on dont expect anything good to come out of it.

Just so you know how quick and unexpected things can happen.

http://www.ridebehindvideos.com/vid...ent20060210.wmv


This was a girl riding a CBR 600RR. Does not matter what your riding, from this video your just screwed.
 
Helmets are your friend!!

I learned to wear a helmet the hard way when i woke up in the hospital after i cart-wheeled my Snowmobile at 70mph

My friend siad the Sled flipped 8 times end over end and i did a cartwheel in the air before sliding 25-30 yards to a stop.

Ended up with just a concussion, lucky it didn't kill me.

That explains alot huh...lol
 
Dan_Soprano said:
KB 2.2, was 13# will be 17 here in a month or so when I get around to pulling the blower back off and changing the injectors. Other mods are Prochamber, magnaflow catback, MGW shifter, K&N FIPK, Billetflow 90mm Idler, MM Subframes (waiting to get welded in), and SCT X2 tuned by James @ RWTD. Hope to be somewhere between 580 and 600hp at the wheels first dyno this spring.
Man, I so wish I had waited another 6 months before buying mine. :nonono: