North East SSoM Members!!!

whitehorseupnorth · Mar 15, 2006

gaslight said:
I would have gone with the QA1s. When I talked to Denny, he said some racers were having problems with the Strange pieces lasting. After a long trip they would open the trailer to find the Strange ones leaking. Not trying to burst your bubble. Hopefully they work great for you.

Maybe, but those are a different type of shock than what I'am getting. The race shock are not the same. You know me, I did a lot of research and many guys liked them. There is too much to choose from. BTW, you can get the HD TA for about $550..

BadVoodoo · Mar 16, 2006

whitehorseupnorth said:
Those things shouldn't rust inside of a garage. Don't even bother. Whats done is done.. A couple of good brake applications should do the trick, though the rears don't look so good..

I am questioning the hubs more so than the rotors. What could I use to clean them up?

Venom351R · Mar 16, 2006

Badstang00 said:
I am questioning the hubs more so than the rotors. What could I use to clean them up?

Elbow grease. Get cracking your on vacation.

whitehorseupnorth · Mar 16, 2006

Badstang00 said:
I am questioning the hubs more so than the rotors. What could I use to clean them up?

Thier fine... just put the rims back on, problem solved!!!

BadVoodoo · Mar 16, 2006

Wassup with your avatar Chris?

whitehorseupnorth · Mar 16, 2006

Needs some Photoshop to see it better. I'll have the wife do it...

DoubleONegative · Mar 16, 2006

Mike i wouldn't worry about the rust. it's almost inevitabe on the disks and hubs

whitehorseupnorth · Mar 16, 2006

Felt good to work on the stang... Got the E-brake working, put my shocks and struts on and spindles. Just waiting for my brake kit. Can't wait to drive it now...

shyshy · Mar 16, 2006

whitehorseupnorth said:
Felt good to work on the stang... Got the E-brake working, put my shocks and struts on and spindles. Just waiting for my brake kit. Can't wait to drive it now...

Ooooh... my e-brake doesnt work either. Someone come help me, I'm a stupid girl

BadVoodoo · Mar 16, 2006

whitehorseupnorth said:
Felt good to work on the stang... Got the E-brake working, put my shocks and struts on and spindles. Just waiting for my brake kit. Can't wait to drive it now...

I am with you Chris, I can't wait to drive mine either! Seeing, hearing, and getting a ride in Mike's car on Staurday really got me anxious. BTW Mike, your car sounds GREAT, and the thing pulls like an animal, I was very impressed

On a side note, I cleaned up all the oil that I could get to, and have not seen any more at this point. Wheels will get bolted up Friday, and then I just have to wait for my tune and my pulley puller.

Dan_Soprano · Mar 16, 2006

shyshy said:
Ooooh... my e-brake doesnt work either. Someone come help me, I'm a stupid girl

hey stranger!

Venom351R · Mar 16, 2006

Badstang00 said:
On a side note, I cleaned up all the oil that I could get to, and have not seen any more at this point. Wheels will get bolted up Friday, and then I just have to wait for my tune and my penis puller.

BadVoodoo · Mar 16, 2006

Go wrap your lips around your micron exhaust and suck start your gay a$$ Honda you homo!!

whitehorseupnorth · Mar 17, 2006

Badstang00 said:
Go wrap your lips around your micron exhaust and suck start your gay a$$ Honda you homo!!

gaslight · Mar 17, 2006

cold96snake said:
I thought you had those sub's welded in...(*cough* sig)

yes! I know I have to change it just haven't bothered yet.

gaslight · Mar 17, 2006

whitehorseupnorth said:
BTW, you can get the HD TA for about $550..

where did you see that? At their website or a reseller?

gaslight · Mar 17, 2006

whitehorseupnorth said:
Felt good to work on the stang... Got the E-brake working, put my shocks and struts on and spindles. Just waiting for my brake kit. Can't wait to drive it now...

A little spot weld fixed my problem with my e brake. The braket is only held up by 2 spot welds. One of the welds broke on mine a long time ago. This caused the cable to rub the driveshaft at times.

whitehorseupnorth · Mar 17, 2006

gaslight said:
where did you see that? At their website or a reseller?

JD's perfromance. $597. Rectangular or Round/Heavy Duty..

http://www.jdsperformance.com/index.asp?initemuid=422&fcmd=item&inmake=all

Dan_Soprano · Mar 17, 2006

gaslight said:
This caused the cable to rub the driveshaft at times.

whitehorseupnorth · Mar 17, 2006

Things got a little stressful today. I found out that the calipers for my brake kit are on international back order till May!! I can't wait that long. So, I'am like no problem, someone has to have them. So, I start calling around and after the 8th or 9th call with no luck, now I'am worried. I found the ad in 5.0 that I had seen last fall and thought to myself, I need to call these people first, if I do an upgrade. Wouldn't you know it, I callled these guys up and they had the kit. It will ship out monday. When I told the guy I called a ton of places, he said, thats why you don't call other places, LOL.. Just glad crisis avoided!!!!

North East SSoM Members!!!

whitehorseupnorth

SSoM President

BadVoodoo

Venom351R

whitehorseupnorth

SSoM President

BadVoodoo

whitehorseupnorth

SSoM President

DoubleONegative

Active Member

whitehorseupnorth

SSoM President

shyshy

New Member

BadVoodoo

Dan_Soprano

Venom351R

BadVoodoo

whitehorseupnorth

SSoM President

gaslight

gaslight

gaslight

whitehorseupnorth

SSoM President

Dan_Soprano

whitehorseupnorth

SSoM President

Similar threads

North East SSoM Members!!!

SSoM President

SSoM President

SSoM President

Active Member

SSoM President

New Member

SSoM President

SSoM President

SSoM President

Similar threads

Privacy & Transparency

Privacy & Transparency