North East SSoM Members!!!

gaslight · Apr 26, 2008

I think I just came or maybe thats just Ectoplasm all over the place
http://videos.streetfire.net/video/2007-Shelby-GT500-Twin-Turbo_158452.htm

gaslight · Apr 27, 2008

its so quiet you can hear the crickets.

gaslight · Apr 27, 2008

started the stang today. Sounds and feels good.
Turn signals not working but the hazards do. Going to have to figure that out. Probably has to do with there being a much lighter load with the LEDs in there. I think its a common problem and you have to get a different blinker to plug in the fuse area.
Notched the underside of the hood so it will clear the intake.
Checked the local Cumberland Farms and their pumps still say 93 octane . That is where I normally go anyways so I hope it stays that way. I think its the same price or extremely close to the 2 stations that are within 1000 feet. The other 2 only have 91 octane. I do know that Irving a couple of miles away also has 91 .

Venom351R · Apr 27, 2008

How did it run?

That turbo Shelby is insane!!!

gaslight · Apr 27, 2008

ran fine. same as last year. Just let it run for a while in the garage until the water temp went over 100.

Venom351R · Apr 28, 2008

Well now you need to drive it, finish that tire upgrade and take it to the track.

Where the hell has everyone else been?

gaslight · Apr 29, 2008

easier said then done. Still shopping for the tool I need to roll the fenders. Remember I still have 4 lugs and drum brakes in the rear so it won't be cheap to do just the rear.

2k3gt · Apr 29, 2008

whats up guys. never thought to check the regionals for local stangers. moved here from california last year to portsmouth, and now to york...

i need to have some parts installed. the only place ive looked at that sounded right is performance dyno in concord. do you guys know any competent shops that could handle installing and aligning my c/c plates, subframes, LCAs, shocks and struts?

much appreciated, ill be in touch

cold96snake · Apr 29, 2008

gaslight said:
I think I just came or maybe thats just Ectoplasm all over the place
http://videos.streetfire.net/video/2007-Shelby-GT500-Twin-Turbo_158452.htm

CHRIST!!! I thought it was going to pick the front end up!!

Venom351R · Apr 29, 2008

2k3gt said:
whats up guys. never thought to check the regionals for local stangers. moved here from california last year to portsmouth, and now to york...

i need to have some parts installed. the only place ive looked at that sounded right is performance dyno in concord. do you guys know any competent shops that could handle installing and aligning my c/c plates, subframes, LCAs, shocks and struts?

much appreciated, ill be in touch

Hey whats up. Ive delt with Performance Dyno before they did a chip for one of my previous mustangs and I plan on going back to them for this one as well.

Im not sure about installing the sub frames b/c I dont think they do welding but they can do everything else. Our friend chris works at a tint shop in Portland and they do installs as well performance type of stuff. Ive know chris for quite a few years he built a sick turbo fox and hes done a lot of work on my Mustangs, Gears, Supercharger installs all that type of stuff so he does good work. Give them a call at 797-8486 and ask for chris. Tell him Travis said to call you off stangnet just ask him about what you want installed and for a price he can give you a general idea. Im having mine brought in there shortly to have a cam/springs and intake installed along with a few other things.

gaslight · May 1, 2008

cold96snake said:
CHRIST!!! I thought it was going to pick the front end up!!

Good thing it was strapped down.

gaslight · May 2, 2008

I think its time to take the car out for a ride this weekend. Just have to check and make sure the insurance is on it. Really needs to be washed first.

Venom351R · May 2, 2008

I might be leaving for the track soon, to bad no one else can come.

gaslight · May 3, 2008

Did you go and if so how was it?

gaslight · May 3, 2008

heres a Whipple charged Shelby at the track. I think the best run is at the end after some gay music and minor montage.
http://videos.streetfire.net/video/Shelby-GT-500-with-34-whipple-supercharger---few_144561.htm

BadVoodoo · May 3, 2008

gaslight said:
its all too pricey for me but I can dream. With the crappy economy I wonder what the prices on those cars will be and if they will be short lived production runs. This crappy economy and high gas prices could spell disaster for some of these new cars. It could lead to much shorter than predicted production runs and the end of the current horsepower war. Just like the early 70's.

I agree with that 100%

BadVoodoo · May 3, 2008

It's been a long time since we all had a chance to hang out. We really need to plan a get together soon.

gaslight · May 3, 2008

Its been real quite around here. Not just this thread but the whole NE section.
It would be nice to get together and have a good laugh.

Venom351R · May 4, 2008

gaslight said:
Did you go and if so how was it?

no I didnt go, I planned on it but I felt like crap later on in the day and just didnt feel up to driving to N.H. Maybe on weds but Id just like to get all the new parts put on.

Bonny Eagle Car show is coming up, we should hang out there for the day.

gaslight · May 4, 2008

which day is it?

North East SSoM Members!!!

gaslight

gaslight

gaslight

Venom351R

gaslight

Venom351R

gaslight

2k3gt

New Member

cold96snake

Venom351R

gaslight

gaslight

Venom351R

gaslight

gaslight

BadVoodoo

BadVoodoo

gaslight

Venom351R

gaslight

Similar threads

North East SSoM Members!!!

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency