North East SSoM Members!!!

[gaslight]

jealous?

 

[FEARNO1]

. If that is not the solution, I will get it dynotuned by Horsepower by Herman next spring.

Then you better stop by here when you drive down because it looks like hes moving here

 

[DoubleONegative]

jealous?

no not really

 

[DoubleONegative]

Then you better stop by here when you drive down because it looks like hes moving here

thats a hella long drive for a tune then

 

[gaslight]

Ok

 

[gaslight]

thats a hella long drive for a tune then

so isn't going to COncord

 

[DoubleONegative]

so isn't going to COncord

that only 2 hours, fred place is like 2 days mang

 

[Venom351R]

Maybe your clutch is on it's way out the door.

Let me drive it, I'll be able to tell if its got a bad clutch

Hey Chris I cleaned and lubed the chain on my bike today ( 500 Mile intervals ) and guess what they say NOT to use on it, Yup WD-40. Well there's 2 things I can think of not to use WD-40 on

 

[Venom351R]

the last guy i heard talking about a hesition between shifts has a 2v GT and he ended up bending a rod

D'OH, there you go Mike, F'ed up internals, time to tear her down.

 

[DoubleONegative]

D'OH, there you go Mike, F'ed up internals, time to tear her down.

the only thing wrong with the 03/04s is the heat issue with the 7 and 8 cylinders. the teflon coating on the pistons don't like alot of heat...correct me if am wrong mike, dan or fred.

 

[DoubleONegative]

click on the Mustang sidesways at 80+mph vid....helluva save!!!

http://www.1320video.com/videos.php

 

[Dan_Soprano]

Mike, you may want to try running the BAP full time. I will be switching to that next spring.

 

[BadVoodoo]

Mike, you may want to try running the BAP full time. I will be switching to that next spring.

So what needs to be done to accomplish this, Dan?

 

[BadVoodoo]

the only thing wrong with the 03/04s is the heat issue with the 7 and 8 cylinders. the teflon coating on the pistons don't like alot of heat...correct me if am wrong mike, dan or fred.

You are correct sir. That's why I am going to do a bunch of cooling mods before the 3.2" pulley goes on.

 

[BadVoodoo]

Let me drive it, I'll be able to tell if its got a bad clutch

Hey Chris I cleaned and lubed the chain on my bike today ( 500 Mile intervals ) and guess what they say NOT to use on it, Yup WD-40. Well there's 2 things I can think of not to use WD-40 on

I gotta say that was a good one Travis!!

 

[BadVoodoo]

Then you better stop by here when you drive down because it looks like hes moving here

Just got my new tune from James. Hopefully this will at least fix this issue.

 

[BadVoodoo]

the last guy i heard talking about a hesition between shifts has a 2v GT and he ended up bending a rod

That is the weak spot of the 2V GT's. Quit trying to work me up!!

 

[FEARNO1]

Steggys on its way home tomorrow

Of course UPS doesnt work on Saturdays so I prolly wont get it til Mon-Tues

 

[FEARNO1]

the only thing wrong with the 03/04s is the heat issue with the 7 and 8 cylinders. the teflon coating on the pistons don't like alot of heat...correct me if am wrong mike, dan or fred.

One guy that tore down his motor found he was missing a ring on one of his pistons...bet you cant guess which piston....#7

 

[whitehorseupnorth]

Seems to be too much drama in the 4.6 crowd. The push rod 5.0 will allways be king!!! Everytime you turn around it's something else. Hell I just get in turn the key and trap over 120.. What more can you ask for.. Oh ya, I tuned it myself...