North East SSoM Members!!!
- Thread starter whitehorseupnorth
- Start date
DoubleONegative
Active Member
FEARNO1 said:NMRA Racing today
I hate you....
Next year i'll be there
Chris,
I'm Gonna bring my Line Lock, Bullitt pedals, New idler pullies, shifter gasket, and maybe my Raptor shift light. that should be enough to keep us busy for alittle while.
Then we'll test the line lock. My new tires will be here today or monday, so we should send the current ones off in style
Dan_Soprano
15 Year Member
i'm out. I just got home. Been flying since 4:30 this morning. I need to study tomorrow for the ass raping I will recieve on monday and tuesday.
Chris-
Did Adam ever get that fire going? Going to be quite the rager if it ever lit. Wish I could have stayed longer but I could tell it was getting colder and I wanted to get home w/ pleanty of day light left since the bulbs I have in there now are not adjusted yet so I dont know where my lights are pointing. Cant wait for some rain to wash the damn sand off the roads, I gave it one last rip on my road and must have been a fine layer of sand b/c the back end got a little wiggly on me. It dosnt take much, then again it does not take much throttle inmput for it to respond anyway, almost forgot how damn fast this thing is.
Did Adam ever get that fire going? Going to be quite the rager if it ever lit. Wish I could have stayed longer but I could tell it was getting colder and I wanted to get home w/ pleanty of day light left since the bulbs I have in there now are not adjusted yet so I dont know where my lights are pointing. Cant wait for some rain to wash the damn sand off the roads, I gave it one last rip on my road and must have been a fine layer of sand b/c the back end got a little wiggly on me. It dosnt take much, then again it does not take much throttle inmput for it to respond anyway, almost forgot how damn fast this thing is.
cold96snake
20+ Year Stangneter 
got my subs welded in today. Not all the welds look pretty but they will work just fine. Spent a lot of time doing it. Not enough room under the car to move around so that made things difficult. I would love to have a lift.
Used a wire wheel on a angle grinder to remove the paint. Damn brass bristle went all over the place. I though I had them all cleaned up but I kept finding them all day. Some of the time I would find the bristles sticking through my clothes and into my skin...OUCH! Sharp little bastards kept poking me all day. Don't want to do that again any time soon.
Ran out of wire part way through, that sucked balls.
Next project is the pan hard rod.
Used a wire wheel on a angle grinder to remove the paint. Damn brass bristle went all over the place. I though I had them all cleaned up but I kept finding them all day. Some of the time I would find the bristles sticking through my clothes and into my skin...OUCH! Sharp little bastards kept poking me all day. Don't want to do that again any time soon.
Ran out of wire part way through, that sucked balls.
Next project is the pan hard rod.
DoubleONegative said:I hate you....
Next year i'll be there
Chris,
I'm Gonna bring my Line Lock, Bullitt pedals, New idler pullies, shifter gasket, and maybe my Raptor shift light. that should be enough to keep us busy for alittle while.
Then we'll test the line lock. My new tires will be here today or monday, so we should send the current ones off in style
Now I have a stiffy!! Anybody have a camera we can use?
If you want some help with your injectors, let us know. Hope to see you soon bro
Dan_Soprano
15 Year Member
Dan_Soprano
15 Year Member
DoubleONegative
Active Member
I wanna thanks to Chris, Mike and Brian for the help yesterday. it was a good time!!!
Oh and thanks to trav for going and picking up Pizza!!!
Here is the vid
http://videos.streetfire.net/video/829E4F64-0EBC-4EFF-85F5-39C86B73FDB1.htm
Oh and thanks to trav for going and picking up Pizza!!!
Here is the vid
http://videos.streetfire.net/video/829E4F64-0EBC-4EFF-85F5-39C86B73FDB1.htm
Similar threads
