North East SSoM Members!!!

[BadVoodoo]

Shaw, what do you think about going down to Pete's this weekend ( Sat the 1st) to get our tunes done? I may be going to Florida for a few weeks leaving Around the 15th so I don't know if I will be able to make it then.....

If my tune, pulley, and pulley removal tool are here in time, for sure!!
I will let you know

 

[BadVoodoo]

does anyone have stock 17" gt wheels ????? i need to buy some !!!!!!!!!

Sorry, no-can do bro

 

[Dan_Soprano]

If my tune, pulley, and pulley removal tool are here in time, for sure!!
I will let you know

I have the tool...........you could stop here on the way down and we could do the swap real quick. When is your stuff supposed to get there?

 

[Dan_Soprano]

whats up man how are things ? no anyone with some stock rims?

I have a stock set of bullitts down in Jersey........when would you need them by? I probably won't be going back down till june...........

 

[BadVoodoo]

I have the tool...........you could stop here on the way down and we could do the swap real quick. When is your stuff supposed to get there?

Well, I just called Kenne Bell, and they said the tool will be here on Thursday. This just came 5 minutes ago

 

[BadVoodoo]

Just waiting on the tuner now

 

[Dan_Soprano]

Just waiting on the tuner now

well ****! Call Pete up and tell him to rush it so you and I can spend some $$ on him this Sat!!!

 

[BadVoodoo]

well ****! Call Pete up and tell him to rush it so you and I can spend some $$ on him this Sat!!!

I just did!!!

 

[BadVoodoo]

What do you think Dan, a 74" belt? That's all I am running is the 3" upper.....

 

[Dan_Soprano]

What do you think Dan, a 74" belt? That's all I am running is the 3" upper.....

I just got this from Pete:

I will be there this Sat. How about in the early afternoon, around 2 pm?
Pete

I'm def. going. It would ROCK if you went too!! I put the 17# (3" pulley)on yesterday, and the 75" Gatorback I had laying around fit perfect. I am running the 90mm Idler also though..........

 

[gaslight]

the M/T street radial works better than the M/T et street, on my factory car it 60's better on the radial than the et street. it's a stick car and 60's 1.51 lanching aroung 6500 rpm.

One of these days I want to take a good look at your car but when I'm there I usually don't have much time to stick around. Work keeps me moving.
How was the start of your season?

 

[whitehorseupnorth]

If you guys are going, I wouldn't mind tagging along.. Mike, if you go does that mean you won't be going on the 15th? I had planned on going then. My new meter should be here on thurs. My brakes should show up today..

 

[gaslight]

the guy that does my inspection told me he has some 31 spline 4lugs I can buy. He said he will give me a good price. Low mileage but not sure the brand right now.
My panhard bar is 95% done. Don't want to finish it until I figure out what I will be doing for springs.

 

[Dan_Soprano]

Well I got out of work today at around so I changed the oil in the car and took it down to Mikes shop in Westbrook to see how safe the tune I got was. All I can say is the tune blows, and the #'s show it. Here's a link to my thread on modularfords.com:

http://www.modularfords.com/forums/...y-with-new-setup-very-dissapointed-47879.html

 

[cold96snake]

Well I got out of work today at around so I changed the oil in the car and took it down to Mikes shop in Westbrook to see how safe the tune I got was. All I can say is the tune blows, and the #'s show it. Here's a link to my thread on modularfords.com:

http://www.modularfords.com/forums/...y-with-new-setup-very-dissapointed-47879.html

Wow, that sucks. Hope you get it figured out. Can't believe you had problems w/ the fan they used.

 

[rustangSC]

Well I got out of work today at around so I changed the oil in the car and took it down to Mikes shop in Westbrook to see how safe the tune I got was. All I can say is the tune blows, and the #'s show it. Here's a link to my thread on modularfords.com:

http://www.modularfords.com/forums/...y-with-new-setup-very-dissapointed-47879.html

wow that fan thing was odd man. let me know how you end up this weekend if he does a base run before he tunes anything. i wouldn't think the dyno was off, it is brand new but i will be interested to see the numbers. good luck brotha.

 

[Dan_Soprano]

wow that fan thing was odd man. let me know how you end up this weekend if he does a base run before he tunes anything. i wouldn't think the dyno was off, it is brand new but i will be interested to see the numbers. good luck brotha.

thanks for doing the pulls for me man! Yeah, that fan thing was a bit odd.......

 

[rustangSC]

thanks for doing the pulls for me man! Yeah, that fan thing was a bit odd.......

no problem!

 

[Dan_Soprano]

no problem!

Mike, is there any way you could email me the run files from the pulls today?

[email protected]

 

[cyazo6]

Dan, I wouldn't worry to much about it. I'd guess the tune is just off and Pete really knows what he's doing! If your interested Pete sent me a safe tune with the xcal 2 and I pulled 479 hp and 460 ftlbs.After he dyno tuned it, I gained 25 hp and 40 ftlbs.