• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Stalling on first cold start

  • Thread starter Thread starter strtrcr50
  • Start date Start date Sep 26, 2007

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Sep 26, 2007
#1
  • Sep 26, 2007
  • #1
code 15 help please

I still have a strange problem I can't get rid of. When the car is cold and I start it, it will fire right up and the rpms will drop quickly and stall back out. If I tap the gas a few times, it will run through it. What I can't understand about this is when it does this, the car also loses all preprogrammed radio stations and resets the clock to 0. I have cleaned all the grounds and power connections. I do have a code 15 continious present(power interruption to computer memory or eec keep alive memory test failed) Does anyone have the test for the circutry for this? I'm really starting to draw a blank. It drives me insane to watch the revs come down and the radio flip to am and static. Does anyone know what else is on the same circut as the radio memory hot lead?
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Sep 26, 2007
#2
  • Sep 26, 2007
  • #2
I did have the battery unhooked while i was installing the tweecer though. And it did stall and lose the radio this morning(after tweecer install). I know it had started to build up kams because I was logging them.
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Sep 26, 2007
#3
  • Sep 26, 2007
  • #3
Jrichker, you out there?
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Sep 26, 2007
#4
  • Sep 26, 2007
  • #4
Using this diagram,

I believe that pin 1, black/orange wire to the positive terminal is where I need to check for good connection/continuity. Am I on the right track?
 

Attachments

  • 88-91eecPinout.gif
    167.1 KB · Views: 184

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 27, 2007
#5
  • Sep 27, 2007
  • #5
Sounds like where I would start looking.
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Sep 27, 2007
#6
  • Sep 27, 2007
  • #6
I'll be able to check it out tonight. Thanks.
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Sep 27, 2007
#7
  • Sep 27, 2007
  • #7
I just moved the ring terminal from the starter soleniod to the battery and so far so good. The true test will be tomorrow morning.
 
You must log in or register to reply here.

Similar threads

E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
369
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
I
Electrical Can KAM in A9L be repaired/Replaced?
  • Iceman1998
  • Dec 20, 2024
  • Fox 5.0 Mustang Tech
Replies
1
Views
297
Fox 5.0 Mustang Tech Dec 20, 2024
Noobz347
M
warmed up, hard re-starting on hot days
  • michaelleewebb
  • Mar 26, 2026
  • SN95 V6 Mustang Tech
Replies
9
Views
514
SN95 V6 Mustang Tech Mar 29, 2026
michaelleewebb
M
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
487
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?