• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Starter wont stop engaging

  • Thread starter Thread starter zwoman
  • Start date Start date Jun 19, 2010
Z

zwoman

New Member
Jun 8, 2009
12
0
0
Jun 19, 2010
#1
  • Jun 19, 2010
  • #1
Took my 68 out to the golf course today. When I turned on the car to leave, it cranked, started, but wouldn't stop trying to turn over the engine, even though it had already started. I could turn the key back to the original position but it just kept cranking. I had to pull the battery cables to make it stop. What's up with that? What is my next step (After having it towed home).
 
J

j69302

Active Member
Jan 31, 2006
325
1
29
Jun 19, 2010
#2
  • Jun 19, 2010
  • #2
since it worked fine before then failed, my first guess is a stuck starter relay, sticking in the "start" position allow current to keep flowing to the starter. Follow the positive battery cable to a cylindrical piece on the inner fenders. You'll see some small wires and another big wire on the opposite side which goes to the starter itself. That cylindrical thing is the starter relay. easy to replace and doesnt cost much. You can probably find the same thing at a local parts store as well.

Starter Solenoids
 
2

2+2GT

10 Year Member
Apr 25, 2009
3,333
10
79
Southeastern Pennsylvania
Jun 20, 2010
#3
  • Jun 20, 2010
  • #3
If it happens again, just whack the solenoid with a rock, stick, hammer, etc. It'll stop. And get a new solenoid.

 
D

D.Hearne

New Member
Sep 29, 2000
11,730
6
0
south louisiana
Jun 20, 2010
#4
  • Jun 20, 2010
  • #4
And make sure the battery is fully charged. Weak voltage will make even a good solenoid stick.
 

hungrymonkey

White by Birth, Trash By Choice
Founding Member
Nov 29, 1999
3,077
12
108
Oregon.
Jun 21, 2010
#5
  • Jun 21, 2010
  • #5
x2

Also check your battery cables. When the solenoid sticks for long enough, it will get the cables hot enough to burn the insulation off.
 

Young Gun

New Member
Jun 20, 2010
16
0
0
Camas, Wa
Jun 22, 2010
#6
  • Jun 22, 2010
  • #6
I had the exact same experience with my starter solenoid, but that was on my 88 GT. I replaced the solenoid and it hasnt done it since. Also on a side note, if any of you are running those quick disconnect battery knobs, I would suggest taking them off. Ive had them on both my cars and they just caused alot of ignition problems for me. All good now though!!
 
Z

zwoman

New Member
Jun 8, 2009
12
0
0
Jun 23, 2010
#7
  • Jun 23, 2010
  • #7
Thanks, I'll give it a try. Sorry fot the double post.
 
You must log in or register to reply here.

Similar threads

S
92 5.0 almost starts
  • Steverino
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
256
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 25, 2026
General karthief
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
341
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
249
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
F
1986 mustang no start
  • foxyjamss221
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
397
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2025
foxyjamss221
F
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
360
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?