• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Starting car after three months of being idle...what should I know?

  • Thread starter Thread starter GToddyT5
  • Start date Start date Mar 14, 2007

GToddyT5

Founding Member
Jan 14, 2002
553
0
16
Hamilton, NJ
Mar 14, 2007
#1
  • Mar 14, 2007
  • #1
I haven't driven the GT in about three months. Is there anything I should do before starting it up? I just got a new battery and my alternator tests good. Is there anything I should put in the fuel? Total, it has been driven three times since early December.
 

trav_19

New Member
Oct 29, 2006
810
0
0
Jackson, MI
Mar 14, 2007
#2
  • Mar 14, 2007
  • #2
well you didn't go out and start it every other week or so just to let it run?

how low is the gas..

i would just change the oil first then drive it up and get some fresh gas in it
 

1TallMF

New Member
Apr 17, 2006
955
1
0
Montreal
Mar 14, 2007
#3
  • Mar 14, 2007
  • #3
I'm not sure if it does it on our cars, but does the computer refrain from firing the injectors if the throttle is opened past a certain point? If so it might not be a bad idea to put the pedal to the floor and crank the engine 5-10 seconds to build-up oil pressure before the engine fires-up. Worst case you could pull the fuel pump fuse and crank the engine that way. Did you add fuel stabilizer in the tank when you put it away? 3 months isn't that long though, I can't forsee you having any issues starting it. My car usually starts right up after 3 or 4 revolutions after its been stored.
 

trav_19

New Member
Oct 29, 2006
810
0
0
Jackson, MI
Mar 14, 2007
#4
  • Mar 14, 2007
  • #4
yea the only problems i run into are usually dead batteries
 

GToddyT5

Founding Member
Jan 14, 2002
553
0
16
Hamilton, NJ
Mar 14, 2007
#5
  • Mar 14, 2007
  • #5
I would've needed to keep starting it every other day to keep the battery from dying. One time I forgot to disconnect it and hadn't touched it since, until a few days ago. My friend told me to disconnect the coil and crank it for a few seconds to move the oil around. I did not put any fuel stabilizer in it previously.
 

SaltWaterFish

Founding Member
Jan 6, 2002
208
0
17
Cedar Rapids, IA
Mar 14, 2007
#6
  • Mar 14, 2007
  • #6
Before starting, get in and press the gas peddle all the way to the floor then start the engine.

It will not start b/c this shuts off the injectors. Let the engine crank for 5 seconds. Do this 2-3 times. This will bring up the oil pressure b/c after sitting for so long all the oil will have drained to the oil pan. This will save your bearings and fill the lifters.
 

GToddyT5

Founding Member
Jan 14, 2002
553
0
16
Hamilton, NJ
Mar 14, 2007
#7
  • Mar 14, 2007
  • #7
Will do. I'm going to get rid of this thing within the next two months, have no need for it anymore. If anyone wants a forged, blown, HCI'd GT, point em my way.
 

trav_19

New Member
Oct 29, 2006
810
0
0
Jackson, MI
Mar 14, 2007
#8
  • Mar 14, 2007
  • #8
....so injectors get turned off with the pedal to the floor when cranking huh....i never knew that
 
You must log in or register to reply here.

Similar threads

E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
145
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
461
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
798
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
223
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
A
02 gt no start problem
  • ANT'S GT
  • Jul 2, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
193
SN95 4.6L Mustang Tech Jul 2, 2025
ANT'S GT
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?