Steering and what to do, any ideas.

[95BLKGT5.0]

My tierods are shot they squeak worse than my mattress when my G/F spends the nite. So I am buying a bumpsteer kit from UPR for $99.
But after reading the install sheets I think I am going to wait!

If I have to remove all those parts then I might as well replace my lower A Arms with the updated 2003 Cobra A arms that come with bushing and balljoint already installed for $150.
And I might as well replace the swaybar bushings, end links and rack bushings. Damm I might as well install some HR sport springs too.

Am I missing anything here.

Or is there a better way to do this?

This just got more $$$$$$$$$$
I would be willing to trade parts with anyone who needs gears or a AFPR

 

[LoudToy958]

You can actually do the tie rods without removing anything but the tires. I did a bumpsteer kit in less than an hour. It is very easy if you just take good measurements. I got an alignement right after though.

If you want to do the whole front, you'll need the new a-arms which are a good idea, springs, isolators, struts if you want, and for good measure, if you don't have them(I didn't read your mods), CC plates.

 

[95strokerPSU]

I'm doing my suspension now and everyone has been telling me to get the Maximum Motorsports aluminum rack bushings, so might want to add that to your list.

 

[95BLKGT5.0]

Thanks
I am going to try and do the bumpsteer kits now like LoudToy958 said. And this winter do the rest of the front end.