Steering Rack Bushings

[v8powered281ci]

So my steering rack bushings are shot on my 00 GT. The front suspension is very noisy and clunks when turning. My question is should I go with standard or offset polyurethane rack bushings? My car is lowered and I hear different things on both. I know on offset bushings the center hole is offset in order to compensate for the rack & arms relationship to be parallel again but then ive heard that they can rotate and change the rack and arms relationship even more and increase bumpsteer. Should I just go with standard bushings and then get a bumpsteer kit to eliminate it? Or do offset and the kit as well? Any help is appreciated.

 

[9646gt]

Check your ball joints asap. Mine did the same thing once as well. Can be a major accident if they break on the hwy. Mine broke going over a speed bump and put the front fender on top of the tire.

 

[v8powered281ci]

thanks, once I put my car up one the lift at my work then Ill be sure to check those too. Anyone else? Offset or Standard?

 

[SilverBullet00]

STANDARD if you have a stock k-member

www.maximummotorsports.com

 

[v8powered281ci]

thanks