• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

Stereo and dome light not coming on...

  • Thread starter Thread starter Lilwhitestang
  • Start date Start date Dec 2, 2005

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Dec 2, 2005
#1
  • Dec 2, 2005
  • #1
Ok, so I was told I could butcher the stock wires on my car stereo and match up colors to install a Pioneer cd player I have. When I tried installing it, my dome light went out and my stereo never came back on. I was told I blew a fuse but I checked the fuses for both and neither of them were blew. I have no idea what to do. This was stupid on my part and I guess this is what happens when you don't have anyone to help you out with things around here. Do you guys have any suggestions or do you know what the problem is?
 

Stinger

Founding Member
Jul 7, 2001
7,754
24
118
Basehor (Kansas City), KS
Dec 2, 2005
#2
  • Dec 2, 2005
  • #2
The fuse is blown, check the owners manual for which fuse it is.

Buy an cd player adapter (they are like 4 bux at walmart) and your cd player will plug right into the stock harness...that is unless you already cut up the stock harness...which is sounds like you did...
 

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Dec 2, 2005
#3
  • Dec 2, 2005
  • #3
Stinger said:
The fuse is blown, check the owners manual for which fuse it is.

Buy an cd player adapter (they are like 4 bux at walmart) and your cd player will plug right into the stock harness...that is unless you already cut up the stock harness...which is sounds like you did...
Click to expand...
Yeah....after being told I could do it without a problem, I cut it But I reattached the wires and and put electrical tape on them. Hopefully a cd player harness will still work. If not, I guess im SOL
 

MagnaflowGT

New Member
Oct 3, 2004
73
0
0
Dec 4, 2005
#4
  • Dec 4, 2005
  • #4
noo man, dont cut anything. Ive had this happen to me so many times. Its the #15 fuse in the front. Its the first one on the very front left. Well, its one of those 2. Just pull them out and check them, and replace the blown one.
 
J

JB66

New Member
Aug 21, 2004
565
1
0
New York
Dec 4, 2005
#5
  • Dec 4, 2005
  • #5
On a 93, fuse #8 (15A) covers the radio, courtesy lights, warning chime and power mirrors. If all of them don't work, it's probably the fuse. If, in addition to those, your power windows and interval wipers don't work, you've cut a BK/LG wire. OOps! You didn't say (I don't think) whether the car came equipped with premium sound or not.
 

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Dec 4, 2005
#6
  • Dec 4, 2005
  • #6
JB66 said:
On a 93, fuse #8 (15A) covers the radio, courtesy lights, warning chime and power mirrors. If all of them don't work, it's probably the fuse. If, in addition to those, your power windows and interval wipers don't work, you've cut a BK/LG wire. OOps! You didn't say (I don't think) whether the car came equipped with premium sound or not.
Click to expand...
Yes it has premium sound. But I just bought a wire harness for my CD player and I hooked it up. The cd player wouldn't even power on. So I guess I F'ed myself up the arse on this one. Next time I'll have a little bit more patience and get good help on these things instead of taking matters into my own hands.
 
J

JB66

New Member
Aug 21, 2004
565
1
0
New York
Dec 4, 2005
#7
  • Dec 4, 2005
  • #7
OK with premium sound, the wires are;

Y/BK - power in RUN (fed by fuse 11)
LG/Y - power constant (fed by fuse 8)
LB/R - radio illumination w/ lights on (fed by dimmer)
BK & BK/LG - grounds
These are all on one connector(C280 - 8 flat pins)
The other radio plug (kind of square - 8 round pins), GOES TO THE FACTORY AMPLIFIER. You will not be able to use it with the aftermarket radio. You must unplug it and jumper across the 8 speaker wires. There are also 3 other wires that go to it;
DB - Radio 'ON' signal
R - Ground
W/P - Battery power.
Don't jumper these to anything.

Sorry, forgot the jumpers.
From the 14 pin to the 8 pin

14 = 8
BR/PK = LB
PK/LB = P/W
DG/O = BR
W/LG = W/R
T/Y = Y
PK/LG = LB/BK
LB/W = W/O
O/LG = LG
These are all on the long continuous side of the 14 pin.


I know they don't seem to fit together, but...
 

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Dec 4, 2005
#8
  • Dec 4, 2005
  • #8
UPDATE

I just removed the fuse from slot 8 which was a green 30, and sure enough it was blown. I powered on the cd player and the display came up and it played a cd fine...but no sound at all, not even from the front speakers. crapola I made sure all of the wires were connected and I'm pretty sure they all are on tight. So I don't know. At least I fixed my fuse problem.
 
J

JB66

New Member
Aug 21, 2004
565
1
0
New York
Dec 5, 2005
#9
  • Dec 5, 2005
  • #9
Are you sure you didn't plug into the amplifier feed at the rear of the radio? (The wires coming out the back of the factory unit) As I mentioned, this goes to the premium sound amp under the pass seat. Your radio will not power it. Follow the above instructions to jump the wires to the speakers.
 

MagnaflowGT

New Member
Oct 3, 2004
73
0
0
Dec 5, 2005
#10
  • Dec 5, 2005
  • #10
I still say try the #15 fuse. Its blue, the ones up front. I have a 93 with premium sound with the adapter harness. Trust me. Just try it. even though you are probably still right with fuse 30, but still change/check the 15's up front. that was always my problem
 

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Dec 5, 2005
#11
  • Dec 5, 2005
  • #11
SUCCESS!!!

I removed the CD player from the car and took it inside and re-wired everything the RIGHT way. Took it back outside, popped it in, and FINALLY it started playing music. Then I re-installed the sub I had in the car and had a blast for awhile. The blue fuse popped right in and it worked fine. Now I have a dome light, stereo, and door chime. Now I just need new door pins and a thermostat and I'll be set to go Thanks for the help guys. If it wasn't for you guys giving me advice that car would still be sitting out there with a non-working sound system and no lights.

:SNSign:rules!
 
J

JB66

New Member
Aug 21, 2004
565
1
0
New York
Dec 5, 2005
#12
  • Dec 5, 2005
  • #12
Happy it worked out for you. The EVTM is an important reference book. You should get one from www.helm.com
 
You must log in or register to reply here.

Similar threads

G
Help! Radio, door chime fuse keeps blowing.
  • goofyfoot53
  • Sep 9, 2025
  • 2.3L (N/A & Turbo) Tech
Replies
1
Views
288
2.3L (N/A & Turbo) Tech Sep 9, 2025
91AOD5.0LX
Y
2004 Roush - Dome Lights and radio not working
  • Yurei
  • Nov 10, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
391
1996 - 2004 SN95 Mustang -General/Talk- Nov 20, 2025
squeak93
G
Electrical Getting good ground in 1991 Fox Vert for amps - getting popping noise when I turn on the lights?
  • gvanginkel403
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
427
Fox 5.0 Mustang Tech Tuesday at 11:09 PM
gvanginkel403
G
D
General 3.8 new motor and crank no start no fuel or spark
  • Doubledam32
  • Nov 22, 2025
  • Special Production
Replies
0
Views
434
Special Production Nov 22, 2025
Doubledam32
D
S
2005 Ford Mustang Replacement Radio
  • Sambo1964
  • Jan 22, 2026
  • The Welcome Wagon
Replies
1
Views
136
The Welcome Wagon Jan 22, 2026
Sambo1964
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?