• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Stock 4.6L SOHC w/ blower, how much will it take

  • Thread starter Thread starter mrpositraction
  • Start date Start date Sep 3, 2004
M

mrpositraction

New Member
Aug 28, 2004
296
0
0
Columbia, MO
Sep 3, 2004
#1
  • Sep 3, 2004
  • #1
I will be putting a blower on my stang soon but I am trying to figure out how much will the stock internals(including Transmission) take before I start breaking stuff. 99% of the time is done off the track. One of my co-wokers has a GTS with 150 shot of NOS and he said that he has launched around 3000rpm under spray about 9 times now and have seen no problems with anything. Clutch still works fine Everything. I am worried that the internals will not hold up. I plan on having 6psi and water/methanol injection. Some Dyno's I have seen measure 410 rwhp with this set up. I am not sure if it was really all stock, but that is what the shop manager said. If you do the calculation of 17% drive terrain loss (found on web) that comes out to 492 bhp. That is a lot for a stock set up. What do you think. Or does all this sound fishy.
 

stang976

New Member
Apr 13, 2004
853
0
0
Westchester, NY
Sep 3, 2004
#2
  • Sep 3, 2004
  • #2
mrpositraction said:
If you do the calculation of 17% drive terrain loss (found on web) that comes out to 492 bhp. That is a lot for a stock set up. What do you think. Or does all this sound fishy.
Click to expand...

492 huh???

anyways you should be fine at around 400 street driven HP. becareful launching at high rpms though with stock axles, driveshaft, etc.. and dont over rev the engine despite thepleasingly high numbers your boost gauge will read at 5,800RPM
 

CTGrey02

Founding Member
May 22, 2002
1,403
0
0
Bristol, CT
Sep 3, 2004
#3
  • Sep 3, 2004
  • #3
I've got over 15,000 miles supercharged and probably over 35 runs at the track and its still holding together. 370+ at the wheels.
 

WhiteDevil69

New Member
Sep 15, 2003
518
0
0
Tucson, AZ
Sep 3, 2004
#4
  • Sep 3, 2004
  • #4
mrpositraction said:
I will be putting a blower on my stang soon but I am trying to figure out how much will the stock internals(including Transmission) take before I start breaking stuff. 99% of the time is done off the track. One of my co-wokers has a GTS with 150 shot of NOS and he said that he has launched around 3000rpm under spray about 9 times now and have seen no problems with anything. Clutch still works fine Everything. I am worried that the internals will not hold up. I plan on having 6psi and water/methanol injection. Some Dyno's I have seen measure 410 rwhp with this set up. I am not sure if it was really all stock, but that is what the shop manager said. If you do the calculation of 17% drive terrain loss (found on web) that comes out to 492 bhp. That is a lot for a stock set up. What do you think. Or does all this sound fishy.
Click to expand...
6psi vortech, mufflers and a CAI is NOT gonna get you 492 hp so no worries! Now if you free up your exhaust a little, and up the boost a little and you will be around your 400rwhp which should hold up with a good tune. The key is your tune though, if you get a risky tune then 300rwhp will blow your motor. Get a pro to tune it and you could safely run 410+rwhp. Personally though, I'm gonna keep mine around 370 when mine comes in just to be safe..
 

Green4.6GT

Size Matters
Founding Member
Dec 31, 2001
2,910
0
0
Regina, Sask, Canada
Sep 3, 2004
#5
  • Sep 3, 2004
  • #5
look at it this way.. if you have a 375 hp combo running right on the ragged edge making 400 hp, youre going to explode everything... if you have a 450 hp combo tuned safe, running 400, the motor will be happy for a long time.. its not so much the hp level, but how its making that hp.
 

MDGT

New Member
May 5, 2003
72
0
0
Bethesda, MD
Sep 3, 2004
#6
  • Sep 3, 2004
  • #6
mm&ff has a stock internaled blown 4.6 at 600+bhp and they drag race it constantly...Its all in the tune and the components.
 
M

mrpositraction

New Member
Aug 28, 2004
296
0
0
Columbia, MO
Sep 3, 2004
#7
  • Sep 3, 2004
  • #7
If you take stock number 220 rwhp and 260 bhp that is ~17% drive terrain loss, 492 *17%=83.?? giving you ~410 rwhp. Like I said, I don't know factually what was done to this car, the shop manager claimed it was stock, I was a little shocked by the bhp. As for the components, I will only be running the blower and methanol and water injection, I will be getting it tuned by a pro. Do you think it is a bad idea to run the w/m injection. The number without this kit was 378rwhp. This is still impressive.
 
You must log in or register to reply here.

Similar threads

Part Suggestions 1996 / 1998 4.6L DOHC Mashup Engine Rebuild
  • JimmyJamTheHamSlam
  • May 28, 2020
  • SVT Tech Forum
Replies
1
Views
3K
SVT Tech Forum Aug 30, 2020
Adieu
G
How much can a A4LD take before it breaks?
  • GOvert
  • Jul 25, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 12, 2019
Charlie Cheap
C
T
03 Gt Ring And Pinion Noise .
  • tech12volt
  • Aug 28, 2015
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
818
1996 - 2004 SN95 Mustang -General/Talk- Aug 28, 2015
tech12volt
T
  • Locked
Expired Fs: 2003 Ford Mustang Gt/manual/120,000km/dsg
  • DSG03GT
  • May 15, 2016
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
3K
SN95 Mustangs For Sale (1994-04) May 15, 2016
DSG03GT
  • Locked
Expired 2006 Ford Mustang Gt Premium Coupe Red/red 5spd 4.6l 350hp!! $12,500 (pittsboro, Nc)
  • stutzmd
  • Oct 29, 2012
  • S197 Mustangs For Sale (2005-14)
Replies
0
Views
11K
S197 Mustangs For Sale (2005-14) Oct 29, 2012
stutzmd
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?