stock maf electronics in a pro-m setup?

[94opalgt]

i just wanted to know if this will work or not.i want to use the stock sensor in a 80mm pro-m but i dont know if it work right or not.anyone ever done this before?
i really dont want to use the stock set up,but if this will not work and i have to i will.thanks for any help guys

 

[final5-0]

That is a C&L kinda thing

Not ProM

Grady

 

[95COBRA241]

I don't think it'll work as the stock sensor will not be able to properly read that larger volume of air.

 

[94opalgt]

allright,thanks guys.i was hoping but oh well

 

[94opalgt]

what about this.will i be able to cut and grind out the big post in the middle of the stock maf?will that effect the way the sensor reads the air?all i will be leaving is the tube that the sensor sits in and halr thew plate goes on the back of the post.

 

[CManT1914]

I don't think the stock sensor will work in the Pro-M.

I seem to remember hearing of guys who successfully removed the post in their stock MAF without any problems. I wouldn't do it myself, but if you do, make sure you take the actual sensor out first to avoid damaging it in the process.