stock valve length

[mytight95]

I have a set of e-7 heads, they have been machined, ported, and everything else needed to make them work with a 1.94 intake, and a 1.60 exhaust valve. I do not have a set of dial calipers, nor do i know the proper way to measure valve length.

Sooooooooo, if anyone knows the size of a factory valve in the e7 heads, then it would be much appreciated............



Thanks a lot to those who help



ps.........i know i should get aluminums but for now these will have to do.


Jason

 

[TMC]

http://store.summitracing.com/partdetail.asp?part=MAN-11532-8&view=1

http://store.summitracing.com/partdetail.asp?part=MAN-11531-8&view=1

These valves will work perfectly with your heads.

 

[mytight95]

ok i took one of my stock valves to a buds this morning, we got a rouugh measurement of 5.048, that was from the tip to the lowest part of the valve head.

i don't know if that is right...........the links you posted were for a 4.911 length.

Does this mean that the difference doesn't matter or what