I've had the March A/C eliminator bracket on for several years, and have had to use progressively smaller belts to stop the squall.
I fianally got around to a more premanent fix. The belt wrap on the alternator, wasnt much(where squall comes from), and I figured by dumping the stock tensioner, and relocating the pully from the tensioner, to the March bracket as an idler, there'd be a little more wrap, on the alternator. The tensioiner pully & mount pad were cut off the spring tensioner. The new idler was mounted on the March bracket, and washers were added to align the idler with the rest of the serpentine pullys.
It was about this time I realized rerouting the serpentine would be even better. Looking from the front Serpentine wraps around alternator from the left, travels from alt, to idler on right, then to bottom of crank pully wraping in a reverse "S", over top of WP Pully to bottom of alternator pully. The March alternator bracket has an adjustable dog bone arm, that sets belt tension.
The combination of changing the tensioner pully to an idler and rerouting the serpentine, has eliminated the extreme belt tension (used to stop the squall) and compleatly eliminated any squall. Belt length used is IIRC 58 3/4in.
I fianally got around to a more premanent fix. The belt wrap on the alternator, wasnt much(where squall comes from), and I figured by dumping the stock tensioner, and relocating the pully from the tensioner, to the March bracket as an idler, there'd be a little more wrap, on the alternator. The tensioiner pully & mount pad were cut off the spring tensioner. The new idler was mounted on the March bracket, and washers were added to align the idler with the rest of the serpentine pullys.
It was about this time I realized rerouting the serpentine would be even better. Looking from the front Serpentine wraps around alternator from the left, travels from alt, to idler on right, then to bottom of crank pully wraping in a reverse "S", over top of WP Pully to bottom of alternator pully. The March alternator bracket has an adjustable dog bone arm, that sets belt tension.
The combination of changing the tensioner pully to an idler and rerouting the serpentine, has eliminated the extreme belt tension (used to stop the squall) and compleatly eliminated any squall. Belt length used is IIRC 58 3/4in.