stroker kit for 86-87 turbocoupe 2.3l????

FATHERFORD said:

the 70 boss 429 mustang was WAY under rated...

food for thought.

Click to expand...

I was really wondering how do you make more Hp than a 427, 428, and a 429 with J/Y parts and a so called crank that a machine shop wants to charge you more to work on it? When I mean more 479hp is 109 hp more than a 70' 429 boss mustang. Do you got any links to show where a 351M came with canted valves or even a 4 barrel carb? Most of the 351m/351w/302's where two barrels making them crapy heads to be useless since the runners are pretty small. Also can a 351m head bolt on to a 351w? As an exspample only; I know a 351w is basicaly a 302 which you can't bolt a 351c on to either one unless you got some real money on you. That is because of the way they both pass water in different ways and the intakes that allow a 351c head on a 302/351w is VERY rare. (thus the 302 boss mustang)

I really would like some links so I could double check all this crap I rattled on about. There are kits on the net to make a 393ci sbf w/465 hp but using aftermarket heads / Cam and a few other things but nothing so fair making that kinda power on stock 351m heads/ stock Cam

Click to expand...

351wcoupe said:

I don't know of any 351M that were 4 barrel. The heads are definately canted valves(I'm looking at them) The big difference in these and the cleveland heads is these have an open chamber w/ 76CC and some clevelands have a 67CC closed chamber head.

Click to expand...

Pro-Hawk said:

I don't get it at all, your making 475hp using: Stock heads with 76cc open chambers, 89' 5.0 cam, 302 .030 pistons, aftermarket stroker crank, 351w block/393, and stock rods

The 69-73 351 ( not sure whether C,M or W) made anywhere from 250-330 hp depending on stuff like a 2 or 4 carb and heads etc. Your crank and 89' cam added anywhere from 145hp to 225hp over a 69-73' 351

Click to expand...

351wcoupe said:

the 69 351 Cleveland w/ 4 barrel heads that is sitting in my garage made 330hp stock.
Yep stock open chambered head. (I'm basing the numbers from the MR gasket engine simulator) and I'm using the actual flow numbers for those cylinder heads. I'm not using the 89 302 cam but I intended on using that engine for the pistons. Instead I'm gong to just use it for a roller conversion it out and buy the "302 Boss style" pistons and sell whatever is left. The cam is a 351W roller cam I bought on ebay for $41 a while back.(They spelled it 351 winsler") Everyone I've talked to who has already done this said not to use a cam with more than .500" lift.
The difference in power is long rod/short piston, less rotating mass, and a little more rpm.
A friend of mine has a 351 Clevor that pulled 561hp @7100 so theres hope for me.

EDIT:
By the way I finally got around to checking out the pics of the SVO. It looks great.

Click to expand...