stupid question, but i'll ask anyway....

MI95Cobra

New Member

Aug 20, 2006

451

1

0

Oklahoma City

Sep 25, 2006

#1

• Sep 25, 2006

• #1

valve covers from a 87 - 93 5.0 will fit on my car right??? only the top of the block is angle a little different right????? i'm thinking of getting dressup stuff for it and i was thinking valve covers....its hard to find valve covers for a 95 5.0....i'm thinking of the ones with cobra powered by ford on them....what do ya'll think??? i'm also thinking of poder coating my upper intake black or having it polished..... what do ya'll think???

 

parchisi

New Member

Apr 13, 2006

519

1

0

New Mexico

Sep 25, 2006

#2

• Sep 25, 2006

• #2

I'm pretty sure they'll fit, but wait until you hear from somebody else. I have the black powder coated Trick Flow intake, and I think it looks illin'

 

True 5.0

Member

Sep 22, 2006

237

0

17

Southeastern Wisconsin

Sep 25, 2006

#3

• Sep 25, 2006

• #3

The 87-93 EFI valve covers will bolt in but the oil filler tube is in the wrong place and the 94-95 EGR and mount sit too low and will hit the cover. A spacer will remedy the latter issue but rework/welding will be needed on the former.

 

MI95Cobra

New Member

Aug 20, 2006

451

1

0

Oklahoma City

Sep 25, 2006

#4

• Sep 25, 2006

• #4

i have a 1/2 in spacer that i'm going to put on....that will take care of the space , but what exactly will i have to do with the oil filler tube????

 

True 5.0

Member

Sep 22, 2006

237

0

17

Southeastern Wisconsin

Sep 25, 2006

#5

• Sep 25, 2006

• #5

The filler tube on the 94-95 cars is on the right cover at the front end. The earlier EFI covers are on the right cover but maybe 1/3 the way back from the front. The curved intake horn will run right into this filler tube. You will need to relocate the tube and baffle to a different location.

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Sep 25, 2006

#6

• Sep 25, 2006

• #6

There are no stupid questions here cause the people are great on this forum. Search is helpful but it is a internet forum meant for "interactive" exchange so ask away!

I personally like the look of those 87-93vc's MUCH better too.

 

MI95Cobra

New Member

Aug 20, 2006

451

1

0

Oklahoma City

Sep 26, 2006

#7

• Sep 26, 2006

• #7

alright anyone else with an opinion.....

 

fastgtfairlane

New Member

Apr 7, 2006

266

0

0

Sep 23, 2007

#8

• Sep 23, 2007

• #8

i put some stock fox valve covers on my car. i have a typhoon upper and lower, eddy adapter, and pp 65 mm tb. it was a pita getting the upper with the tb on. the fill tube is farther back. i got it on and the tube hits the block on the tb where the iac goes. with a 1/2 spacer it will probably work. i havent tried it yet. you can try it or just convert to the fox tb setup. that is what i will probably end up doing.

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Sep 24, 2007

#9

• Sep 24, 2007

• #9

I've posted this info many times with all the details
but
Here are the high points

I run AFR stud mount 165's
Scorpion RR's
Edel RPM
Fox VC's

No spacer needed what so ever

I cut the fill tube in half and spliced it with ricer radiator hose with slight
bend to allow the top half of the tube to be twisted and extended
about 1/2 of an inch.