Now that my '65 has been done for a year, been to the road course a few times, and is running like a champ with the Systemax / EFI setup, I've come to a critical conclusion:
fasterer is betterer
I searched on this and didn't find the answer I was looking for - who's done a centrifugal supercharger install on a 5.0 (or 351)EFI in a '65/66? My concerns are all packaging, since all the kits on the market were made for fox or SN95 cars. So:
- Intake pipe looks like it would be a tight fit to the passenger-side shock tower. I found one post where the author said he removed the EGR spacer to make this fit. Anyone else have experience with this?
- Thinking about the usual candidates for the blower - Vortech S-trim, Novi (1000 or 2000), or maybe a Powerdyne BD... What packaging problems? Possibly insufficient room for the alternator underneath the blower? Hood clearance?
- Whatever else I'm not thinking of...
Anyone done a write-up on an installation like this? Thanks Guys!
fasterer is betterer
I searched on this and didn't find the answer I was looking for - who's done a centrifugal supercharger install on a 5.0 (or 351)EFI in a '65/66? My concerns are all packaging, since all the kits on the market were made for fox or SN95 cars. So:
- Intake pipe looks like it would be a tight fit to the passenger-side shock tower. I found one post where the author said he removed the EGR spacer to make this fit. Anyone else have experience with this?
- Thinking about the usual candidates for the blower - Vortech S-trim, Novi (1000 or 2000), or maybe a Powerdyne BD... What packaging problems? Possibly insufficient room for the alternator underneath the blower? Hood clearance?
- Whatever else I'm not thinking of...
Anyone done a write-up on an installation like this? Thanks Guys!