• Mustang Forums
  • Special Production

Mach 1 Supercharger or turbo

  • Thread starter Thread starter westay34
  • Start date Start date Oct 14, 2007

westay34

New Member
Oct 14, 2007
5
0
0
Greenville, NC
Oct 14, 2007
#1
  • Oct 14, 2007
  • #1
I recently bought a 04 mach 1 and have done a few things to it. I have done a short shifter and intake, h-pipes, rims. Just the basics. I am toying with the idea of a supercharger or a turbo. My next mod is a throttle body. I guess my question is which is better a turbo or supercharger. And how much does the price differ. I am not looking to get a race car out of this but something to just toy with. Also is the installation more difficult for one or the other. Or am I just wasting time with this idea. Cause I have heard that there is only so much you can do until you change gears and other stuff without doing damage to the engine. Any advice would be great.
 
J

jdoug

Member
Sep 2, 2005
14
2
13
SoFla
Oct 14, 2007
#2
  • Oct 14, 2007
  • #2
Supercharger is a considerably easier install than a turbo, and you can probably get one for less than a turbo system. Each has its advantages and disadvantages. Turbos seem to just be catching on in the modular world, I don't know why. I had a turbo import before the Mach, so I was already familiar with turbos, so I'm leaning toward going that route someday.
 

DOHC otto

Member
Oct 10, 2007
139
0
16
Rock Island, TN
Oct 15, 2007
#3
  • Oct 15, 2007
  • #3
The cheapest supercharger kit I've found for a Mach is from Procharger its a stage 2 with a 3 core intercooler and runs about 5000 bucks. Vortech makes one too it goes for about 6500 with intercooler. Both companies offer it polished or satin finished with or without intercooler and make around 8-10 pounds boost. They both include all your fuel upgrades and computer management chips.

Hellion is the only Turbo company I've looked into that makes a special kit for a Mach and they send everything you'll including the new headers which you'll need for the install but since you have to use headers the motor will need to be pulled to install them and the k member which adds a few days on the install. I think everything you'll need for this kit runs close to 7 grand. I'm not sure the boost it makes either but it can't be much more than 8-10 because Mach have pretty high compression and the bottom isn't forged. As for which you should do superchargers seem to be a little more reliable less tuning and stuff.
 

westay34

New Member
Oct 14, 2007
5
0
0
Greenville, NC
Oct 15, 2007
#4
  • Oct 15, 2007
  • #4
Thanks for all the info I think I will stick with a supercharger it sound alot easier. If I was to get a supercharger what would I need to change on the car. I have been told that there is stock parts that need to be replaced due to adding so much more HP that they can't handle it. I have done only a short shifter, intake, H-pipes. I am getting ready to do a new throttle body. But I quess my question is can I put a supercharger on a stock car without doing any damage to the motor. Also with a supercharger do you have a waste gate like a turbo has. I am new to the car thing I have always had trucks. I have a F-250 so I am a diesel person but I just got this mach 1 six months ago to have something to toy with.
 

DOHC otto

Member
Oct 10, 2007
139
0
16
Rock Island, TN
Oct 15, 2007
#5
  • Oct 15, 2007
  • #5
The best way to figure what all you'll have to change is call one of these companies tech lines and ask. The only thing I can think of is your fuel system will need an upgrade but that comes with the kit. Also most of the companies have designed the kits for factory type Machs. As for your wastgate question they come with a bypass valve to prevent surge. The only real difference in the kits is Vortech chargers need to be added into your cars oil system which means you have to punch a hole in the oil pan. Prochargers are self oiling meaning no running extra oil lines. If your wanting the most out of your kit put it on then take it to a performance shop and get it on the dyno and get a custom tune for and that should get out every drop of horse power. If you live anywheres close to Tennessee there is a really good mustang shop that is a Procharger autherized dealer its called DELK their website is delkperformace.com.
And by the way my daily is a F-350 powerstoke 7.3, superchipped it and straight piped it so it blows a little smoke.
 
S

speedytang

Founding Member
Jul 28, 1999
765
1
17
Marengo,Ohio,US
Oct 15, 2007
#6
  • Oct 15, 2007
  • #6
I did not catch it maybe, is your car a Stick or Auto?
 

westay34

New Member
Oct 14, 2007
5
0
0
Greenville, NC
Oct 16, 2007
#7
  • Oct 16, 2007
  • #7
Thanks for the help. I live in NC so I will look at the website. I feel you on the powerstroke. I have a 2003 f-250 with the 6.0 I have done the chip and straight pipes and a intake. My car is a stick and I am just trying to have something to play with. I have been taking it to shows and so I am getting into the fever of adding things. What is your choice the Procharger or the vortec your were talking about.
 

DOHC otto

Member
Oct 10, 2007
139
0
16
Rock Island, TN
Oct 16, 2007
#8
  • Oct 16, 2007
  • #8
If I had the cash I would choose procharger simply because you don't have to fool with oil lines like a Vortech. It oils itself and they make the same power. However I can't afford either so that is why I am going to do Nitrous.
 

westay34

New Member
Oct 14, 2007
5
0
0
Greenville, NC
Oct 16, 2007
#9
  • Oct 16, 2007
  • #9
I totally understand. I don't have the money yet but I am saving for it. So one more last question and I will stop bothering you. Does the supercharger work like a turbo. Is it the same principle. Or totally different. Also what do you think about a new throttle body accufab I think it is a 60 or 65 mm or do I need to go with the 75mm. Also new pulleys.
 

DOHC otto

Member
Oct 10, 2007
139
0
16
Rock Island, TN
Oct 16, 2007
#10
  • Oct 16, 2007
  • #10
Yeah its the same principle as turbo more air and more fuel are forced into the cylinder which in turn means you go faster. They just do it in a defferent way, instead of using the exhaust to spin the turbine and force your air fuel mixture a supercharger uses your belt system to spin it and force your air. There are 2 types of sc's there is a roots style which is like what comes on a 03-04 Cobra or Kenne Bell (I could be wrong but I haven't found a company yet that makes a roots style kit for Machs) and centrifugal style which is what the kits I have suggested 2 you have. A centrifugal looks like a turbo hooked up to your belts. Now I don't really any power difference in the two styles there may be one . But the kits I have suggested both offer great power gains so I know you'll notice a major difference when its done. As for your question about the throttle body I would wait to buy it (its not gonna add a great power gain on its own) and ask the company when you buy your charger what size will work best with the charger. As for pulleys I assume you mean underdrive pulleys and I have never had any on my car, I was told by a buddy that all they do is give you like 10 hp (which means 2 or 3hp if any at the ground) and pull hard on you alternator and electrical system but that could be false info man you'll have to find someone who has some.
 

westay34

New Member
Oct 14, 2007
5
0
0
Greenville, NC
Oct 17, 2007
#11
  • Oct 17, 2007
  • #11
Thanks for all the help. You have made things alot easier to understand.
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
703
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Engine Cleaning Intake valves with lower intake off
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
13
Views
396
Fox 5.0 Mustang Tech Mar 11, 2026
limp
S
S302 Saleen supercharger help
  • sschoup
  • Nov 19, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
2
Views
301
2015 - 2023 (S550) Mustang -General/Talk Nov 19, 2025
sschoup
S
P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
911
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Special Production
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?