Suspension & Long-tubes & (Cleaning Maf)

Hmm I've never seen LT's almost hitting A-arms before! Take some pics! I'm guessing the only way you'll find out is once you've put stuff in... That might be a sign that your motor mounts are toast if its sitting that weird.

As far as the maf, DO NOT USE CARB SPRAY!!! Some old school guys don't know the difference and think it's OK, but it will RUIN the sensor. Use electronics contact cleaner that is specifically labeled as MAF SAFE on the bottle. I use napa brand, or the stuff in the red can, whatever that brand is lol... Basically, spray it out, and don't be afraid to put the straw thingy pretty close to the wires in the sample tube...but do NOT touch the wires with your fingers, or the tube, and make sure you dont bend them or anything.