• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Suspension Question

  • Thread starter Thread starter inphiniti
  • Start date Start date Jun 24, 2006
I

inphiniti

Active Member
Mar 15, 2003
412
3
28
Providence, RI
Jun 24, 2006
#1
  • Jun 24, 2006
  • #1
sup guys.. before i start, names Jimmy... recently just picked up a 95 5.0 so expect to see me in here more often, hopefully ... well heres the deal guys...


im 19, im not makin CRAZY money yet, but currently am workin for T-Mobile and am doin alright... i didnt wanna go crazy with the suspension so i grabbed the Bullit Suspension kit... bought it off a guy on teh boards, threw it in... the shocks and struts were blown out, so replacin the originals with these were perfect... heres my problem i ran into... the springs... said on FRPP that the springs were supposed to drop the car an inch all around... this was perfect drop for me, atleast i thought, because soon i will b running some 18x9s in the front and 18x10s in the back... put the springs in, the rear end seems to have dropped... but the front seems to have gone up? did i do soemthin wrong?

i know normally the skinny springs go in teh back w/ isolators and the thicker ones go in the front.... let me know guys before i go out and spend just as much on springs as i did for the whole kit(grabbed the kit for $400, springs id want would b between 250-300 give or take a bit)


any help/past experiences with this kit would be GREATLY appreciated... school a n00b thanks guys...
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jun 24, 2006
#2
  • Jun 24, 2006
  • #2
Have you checked to see that the front springs are in the perches correctly. Sometimes they can rotate and this causes them to sit higher...
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 24, 2006
#3
  • Jun 24, 2006
  • #3
+1 on the perches.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Jun 24, 2006
#4
  • Jun 24, 2006
  • #4
The Front Spring Pigtails should be in the middle of the 2 holes drilled in the Lower A Arm, out back the Spring Pigtails should both be in the rear and pointing to the drivers side.
 
You must log in or register to reply here.

Similar threads

D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
450
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 14, 2026
Rdub6
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
444
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?