svo caliper

[shorty1993]

very little info on this. the 86 svo caliper is a direct bolt on, correct?

i know other things have to change, but simply meaning the mounting bracket for the caliper. anyone done this any problems you ran into.

thanks for looking. if this works i will write up a faq so the search will come up with something decent.

 

[281pony]

im thinking it will only work when converting to 5-lug.

i have svo calipers on the rear of my car. i only know because i matched the numbers to our 85 svo caliper.

if your not going 5-lug, i am un-aware what you might run into. as long as you run a rotor the same size as an svo (11.35") you should be alright.

im falling asleep, hope that helps some

 

[shorty1993]

these are on the front so the rotor is the same 11".

 

[jrichker]

See http://www.svo73mm.cjb.net/ for help.

 

[281pony]

these are on the front so the rotor is the same 11".

ah this is for the fronts. sorry, lol im definately not the best of help with the technicalities. i got my car with the rear conversion done, i would be clueless as to what the hell was done if i didnt happen to have an svo sitting next to my car in the garage

good luck with it, matt's site should have the info. i never remember/bookmark that link.

 

[shorty1993]

 

[BlownStangGT]

ttt for ya...I just made a post about this also and am inteteresed in finding the results

 

[shorty1993]

i will let you know in the next 2-3 weeks. i am going to do a FAQ on this from start to finish. the info is out there. you just have to piece it all together. but not for long.