I have a 1996 4.6l gt with non PI heads, I am wondering if i can use the 1996 computer and wiring harness on the 2003 4.6l PI head motor i just aquired
i'm swapping a 03 cobra into my car but i have the computer, wiring harness, etc....I can tell you this, all you have to do is flash your computer for your new engine and you'll be fine. Wiring harnesses arent' that expensive, don't know if you could use your old one or not. Hope this gets you started...
i'm swapping a 03 cobra into my car but i have the computer, wiring harness, etc....I can tell you this, all you have to do is flash your computer for your new engine and you'll be fine. Wiring harnesses arent' that expensive, don't know if you could use your old one or not. Hope this gets you started...
I have a 1996 4.6l gt with non PI heads, I am wondering if i can use the 1996 computer and wiring harness on the 2003 4.6l PI head motor i just aquired
Yip, just reuse your fuel rails, alternator, and the electrical stuff [sending units, coil paks etc.] and get the aluminum intake cross over taped for the 2nd temp sensor.