I'm having so much fun with the work I have been doing on my 66 mustang convertible:
After I had bought the car I realized that there were plenty of things that the guy before me had half-assed and it seems like every job I've done with it so far has cost me twice as much as I planned on.
When I bought the car, the previous owner told me that it was a 5.0 engine and 5 speed out of an 83 mustang. I'm in the middle of pulling the transmission out because the guy put in the wrong starter index plate when he changed out the engine and tranny. (after taking it out I saw that it was one for an automatic tranny, I have the correct plate coming). Now that I have the driveshaft, transmission, bellhousing, clutch/flywheel and starter (the previous owner had shimmed the starter with a u-bolt!!!!!), I'm looking at all of these parts I have staged on my back porch and figuring out what I need to buy.
When I checked the transmission tag, the serial number was 1352-238. After checking out some sites, I found that this transmission was originally built for a mustang 3.8 v6!!!!
After looking at the ratios, I saw that they were different than the ones for an 83 or 84 mustang, expecially the overdrive gear was lower. Does anyone know if it is possible to put in a different gearset with a taller 5th gear or would I need to get another tranny? if I have to get another tranny, is there any significant difference in the case length or shafts that would force me to make further modifications (and shell out even more money than it looks like I will already).
If I can just buy a different gearset, anyone know any good places with prices that won't kill me (after my wife gets the bill for this job)?
Thanks in advance.
After I had bought the car I realized that there were plenty of things that the guy before me had half-assed and it seems like every job I've done with it so far has cost me twice as much as I planned on.
When I bought the car, the previous owner told me that it was a 5.0 engine and 5 speed out of an 83 mustang. I'm in the middle of pulling the transmission out because the guy put in the wrong starter index plate when he changed out the engine and tranny. (after taking it out I saw that it was one for an automatic tranny, I have the correct plate coming). Now that I have the driveshaft, transmission, bellhousing, clutch/flywheel and starter (the previous owner had shimmed the starter with a u-bolt!!!!!), I'm looking at all of these parts I have staged on my back porch and figuring out what I need to buy.
When I checked the transmission tag, the serial number was 1352-238. After checking out some sites, I found that this transmission was originally built for a mustang 3.8 v6!!!!
After looking at the ratios, I saw that they were different than the ones for an 83 or 84 mustang, expecially the overdrive gear was lower. Does anyone know if it is possible to put in a different gearset with a taller 5th gear or would I need to get another tranny? if I have to get another tranny, is there any significant difference in the case length or shafts that would force me to make further modifications (and shell out even more money than it looks like I will already).
If I can just buy a different gearset, anyone know any good places with prices that won't kill me (after my wife gets the bill for this job)?
Thanks in advance.