T5 cable clutch ? for 69 mustang

[boss_302]

Anyone on here used a cable clutch conversion kit from modern driveline for a 69/70 mustang with a T5 any input you guys can give me.thanks javed

 

[bnickel]

well you found the only aftermarket company that makes cable clutch kit for the 69/70 cars, at leat that i'm aware of, and i've heard good things about their other cable clutch kits.

 

[jcode68]

Just make sure you do your homework with header fitment and cable clutch. Has been a popular topic on this board, do a search and you will find plenty. Many people (myself included) went hydraulic clutch. Although about twice the cost, you avoid fitment issues with headers etc.

 

[boss_302]

Just make sure you do your homework with header fitment and cable clutch. Has been a popular topic on this board, do a search and you will find plenty. Many people (myself included) went hydraulic clutch. Although about twice the cost, you avoid fitment issues with headers etc.

The 69 that its going in is just a 302 stock manifolds etc no headers, its just a cruiser.javed

 

[CraigMBA]

I have the MD setup in my '65 and I'm totally satisfied.

You can cycle the clutch with your hand.

 

[Rusty67]

Even with stock manifolds there can be clearance issues. The 69/70 351w manifolds (they are different on the drivers side) would not clear my clutch cable setup on my 67. I used a modern drive line setup. My headers are custom build so I don't have clearance issues.

 

[jikelly]

I've got a 73 and my rig job on my Tremec swap made a hydralic setup the way to go. I think I spent about 200. You can check out my parts list here. http://webpages.acs.ttu.edu/jikelly/Tremec page.htm