• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

TAX MONEY what sould I do????????

  • Thread starter Thread starter NCGameDog
  • Start date Start date Feb 8, 2006
N

NCGameDog

New Member
Jun 4, 2005
7
0
0
Union Grove, NC
Feb 8, 2006
#1
  • Feb 8, 2006
  • #1
first off my car is a 95' gt (cobra clone) aode, 2500stall, 4:10's, eibachs, lth and offroad exaust. other wise stock. my dream plan was to buy a procharger, d1sc, to put on the car the way it is. in the mean time enjoy the boosted hp and build a dart based 331ci all forged w/ 205 AFR's or canfeilds and just swap engines, w/ enough blower to make 15psi on the built motor ( around 10 on stock). the thing is I am getting impacient w/ my dog of a car... I got 2,500 bucks back on taxes and I am thinking about the trickflow package from summit (heads cam and intake) sould i go that route or save it with some more and do the blower? but in my area the 5500$ it takes to buy the procharger a fella can get a real nice modded fox. ( i love notches!!!) the bottom line is this: WHAT WOULD YA'LL DO W/ 2500 BUCKS IN MY SHOES? THANKS - justin
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
Feb 8, 2006
#2
  • Feb 8, 2006
  • #2
h/c/i
 
N

NCGameDog

New Member
Jun 4, 2005
7
0
0
Union Grove, NC
Feb 8, 2006
#3
  • Feb 8, 2006
  • #3
why do you say?... i was also looking @ the cam specs on the trick flow cam 221/225@.50 .499"/.510" that seem like a short duration for a blower cam.... i do like the lift #'s though.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Feb 8, 2006
#4
  • Feb 8, 2006
  • #4
unless you plan on racing it, your dream isn't really too practical for the street, IMO. you'll end up spending a ton of money that you didn't really need to. go with the head/cam/intake for now and later get the rest. besides 205 afrs are huge and not too streetable. but its all in what you want.
 
N

NCGameDog

New Member
Jun 4, 2005
7
0
0
Union Grove, NC
Feb 8, 2006
#5
  • Feb 8, 2006
  • #5
strip and street.. and hey i gotta keep up w/ all my buddys who run late model F-bodys (lt1/ls1).. but i agree i just want to make between 500/600 streetable rwhp and have peace of mind to boot. I hear lots of horror stories of stock blocks splitting w/ anything over 10psi. true or urban legend?
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Feb 8, 2006
#6
  • Feb 8, 2006
  • #6
NCGameDog said:
strip and street.. and hey i gotta keep up w/ all my buddys who run late model F-bodys (lt1/ls1).. but i agree i just want to make between 500/600 streetable rwhp and have peace of mind to boot. I hear lots of horror stories of stock blocks splitting w/ anything over 10psi. true or urban legend?
Click to expand...

Urban Legend. Boost has nothing to do with it. Its how much power you are actually putting out and the state of tune, how high you rev it, etc etc etc.


Why would u only stop at 331 with a dart block?


This is your issue....your budget right now will make your car a very respectable stang. Wont be a LS1 hunter...but it will hang with stock ones or lightly modified ones. But if u buy that h/c/i now you can kiss every single part goodbye for the 331. I would go with more than a 331 with a dart, and those parts you buy now will not be optimized on the bigger motor.

And with $2500, is that even enough for just the trickflow kit? I would think you would need an extra few hundred to $1000 for the small BS parts that come along with it.

With your goals in mind, i say go nitrous now put that $1500 in the bank for you future beast of a motor
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Feb 8, 2006
#7
  • Feb 8, 2006
  • #7
2500$ in tax refunds, wow.
I gotta move in the states.
 

BDAWK2002

New Member
Apr 28, 2005
139
0
0
Old Bridge N.J.
Feb 8, 2006
#8
  • Feb 8, 2006
  • #8
TKO swapp.....
 
S

Stryfe8822

Member
May 6, 2002
84
0
6
Orlando Fl
Feb 8, 2006
#9
  • Feb 8, 2006
  • #9
How much longer would it take for you to save up for the blower? Because personally I would stick to your original plan it make take longer but it would be cheaper. Save up for the blower put it on save up for your 331 long block and than put that in trust me you will be a lot happier nowing that you saved money in the long run.
 
You must log in or register to reply here.

Similar threads

What To Do?
  • usaf_branham
  • Nov 25, 2014
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
637
1996 - 2004 SN95 Mustang -General/Talk- Dec 11, 2014
sneaky98gt
ProCharger D-1SC - What do I need?
  • Tripoli
  • Jan 24, 2010
  • SN95 4.6L Mustang Tech
Replies
7
Views
9K
SN95 4.6L Mustang Tech Jan 28, 2010
Rick 91GT
M
  • Locked
Expired 88 Gt Vert 600 Hp T56 For Sale Or Trade
  • Mustangmichael
  • Dec 3, 2009
  • Fox Body Mustangs For Sale (1979-93)
Replies
2
Views
7K
Fox Body Mustangs For Sale (1979-93) Jul 16, 2013
scott bab
S
Mach 1 What should I do to the Mach next???
  • EPIK
  • Jul 10, 2007
  • Special Production
Replies
5
Views
1K
Special Production Jul 17, 2007
Mach1Run
D
What would you do?(tuner question)
  • DSkeet
  • Feb 6, 2006
  • SN95 4.6L Mustang Tech
Replies
4
Views
493
SN95 4.6L Mustang Tech Feb 7, 2006
DSkeet
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?