• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Temp gauge and radiator

  • Thread starter Thread starter Efifty
  • Start date Start date Apr 21, 2009

Efifty

New Member
Feb 15, 2009
14
0
0
Apr 21, 2009
#1
  • Apr 21, 2009
  • #1
Ok. I changed my thermostat in my 92 Gt auto. When i took the old one out it was stuck open. I replaced it wit a 195 stat and my car runs at this temperature most of the time. Is this right?




Also after about 2 hours of driving tonight i open the hood to check the fuild in the radiator an when i twisted the cap off no steam came shooting out at all not even a small hiss sound. Help!


Thanks in advance
 

ID89GT

10 Year Member
May 26, 2008
1,659
18
49
Spokane Valley, WA
Apr 21, 2009
#2
  • Apr 21, 2009
  • #2
What was your temp gauge running at before? Mine only goes to about half that but I can never get my heat to get really warm so I wonder if my t stat is sticking open also
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Apr 21, 2009
#3
  • Apr 21, 2009
  • #3
Does your gauge peg to hot with the engine off/no key and the headlights on?

Thats what my stock gauge looked like during night driving when the gauge went "bad". When it used to work correctly it stayed at the "M" in NORMAL; this is with a 195 T-stat.
 

S&B

I hate my CT. :(
10 Year Member
Dec 18, 2005
1,634
695
204
Cheesehead
Apr 21, 2009
#4
  • Apr 21, 2009
  • #4
you temp guage is about as accurate as pamela andersons Nipples, you need to get a tem gauge and then you wont worry about it anymore. I would say if the temp is constantly suck at that position then your new thermostat works fine
 

Efifty

New Member
Feb 15, 2009
14
0
0
Apr 21, 2009
#5
  • Apr 21, 2009
  • #5
Thanks guys. I changed it because my old t-stat would stay between A and L I thought that was too cold so when i took the old one out it was stuck open
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 21, 2009
#6
  • Apr 21, 2009
  • #6
Agreed that the stocker is too inaccurate to interpolate.
 
You must log in or register to reply here.

Similar threads

D
1996 gt mustang block temp vs coolant temp
  • Dkuehn
  • May 21, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
137
1996 - 2004 SN95 Mustang -General/Talk- May 22, 2026
squeak93
Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
754
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
G
1991 GT 5.0 running hot
  • gvanginkel403
  • Jul 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
310
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2026
General karthief
E
Noise near blower motor behind dash?
  • Ethereal_Zer0
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
517
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Ethereal_Zer0
E
W
High Cylinder Head Temp - Not Overheating?
  • wtfwork12
  • Jun 26, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
9
Views
2K
2005 - 2014 S-197 Mustang -General/Talk- Jul 1, 2025
wtfwork12
W
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?