SN95 Tension Over The Tensioner

joetrainer31 · Oct 23, 2014

Okay, so I'm wondering if my 1yr old Ford belt tensioner is going bad. I noticed that the wheel on it does not spin freely like, for instance, the idler pulley wheel. It will spin a couple of revolutions then it comes to a quick stop whereas the idler pulley will spin and gradually come to a stop. A friend said that is a sign of the bearing going bad. For comparison purposes I purchased an auto store brand and it did the same thing.

At this point I'm wondering if both were bad (I've bought dude parts before), or if that's the way its supposed to be. Anybody have some feedback?

Boosted92LX · Oct 23, 2014

A roller or ball bearing that doesn't spin freely for an extended amount of time isn't necessarily bad. If the pulley it supports isn't very heavy and the bearing is packed with grease it can come to a stop after a few revolutions. In fact, a bearing that spins a long time is most likely dry and will fail sooner. The way to check a bearing is to listen to it, and feel it while rolling it. If it feels rough, it's bad. If it has excessive play, it's bad. Note this is true for greased roller bearings. Oil bath bearings are a different story.

joetrainer31 · Oct 23, 2014

Boosted92LX said:
A roller or ball bearing that doesn't spin freely for an extended amount of time isn't necessarily bad. If the pulley it supports isn't very heavy and the bearing is packed with grease it can come to a stop after a few revolutions. In fact, a bearing that spins a long time is most likely dry and will fail sooner. The way to check a bearing is to listen to it, and feel it while rolling it. If it feels rough, it's bad. If it has excessive play, it's bad.

This is [very] helpful! Thank you. In order to clarify, when you say "excessive play" do you mean front to back movement (similar to how one checks wheel bearings by moving the tire)?

Boosted92LX · Oct 23, 2014

joetrainer31 said:
This is [very] helpful! Thank you. In order to clarify, when you say "excessive play" do you mean front to back movement (similar to how one checks wheel bearings by moving the tire)?

ANY movement. Axial or radial. Front/back.....side/side.

Boosted92LX · Oct 23, 2014

Oh, and you're welcome.

joetrainer31 · Oct 23, 2014

Boosted92LX said:
Oh, and you're welcome.

Yep, yep. Thanks much.

SN95 Tension Over The Tensioner

joetrainer31

Boosted92LX

It's only an inch or two. What's the big deal?

joetrainer31

Boosted92LX

It's only an inch or two. What's the big deal?

Boosted92LX

It's only an inch or two. What's the big deal?

joetrainer31

Similar threads

SN95 Tension Over The Tensioner

joetrainer31

Boosted92LX

It's only an inch or two. What's the big deal?

joetrainer31

Boosted92LX

It's only an inch or two. What's the big deal?

Boosted92LX

It's only an inch or two. What's the big deal?

joetrainer31

Similar threads

Privacy & Transparency

Privacy & Transparency