Engine Tensioner Pulley 83

limp

wrap a little cheese around it and its a done
Oct 4, 2020
4,008
2,253
153
Florida
I am trying to get my tensioner pulley off of the tensioner of my 83 5 liter... Removed the circlip and the thing acts like it pressed on? Is it?
Any advice here,,TY
DSCF0882.JPG
DSCF0883.JPG
 
  • Sponsors (?)


Spray the center with Liquid Wrench. By the time you do this for several days, it will either come off easier or you’ll have the answer about it being pressed on and it will still be easier to change.
If there is a clip, that’s not normally a pressed on item. But I have not changed an 83 tensioner.
 
Spray the center with Liquid Wrench. By the time you do this for several days, it will either come off easier or you’ll have the answer about it being pressed on and it will still be easier to change.
If there is a clip, that’s not normally a pressed on item. But I have not changed an 83 tensioner.
Thanks.... I am assuming that this is the original from 83 so its been on a while, Used my neighbors press and it was on pretty good, but we got it off..