• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

test day guys

  • Thread starter Thread starter andycoupe
  • Start date Start date Nov 10, 2007
A

andycoupe

New Member
Aug 3, 2007
18
0
0
Orange , Ca
Nov 10, 2007
#1
  • Nov 10, 2007
  • #1
Ok guys this weekend is test day for me… I have everything that I think that I need to be safe to jump for a 75 shot of Nitrous to 100 shot…I have one step cooler plugs, drop my timing to 10 degree’s and using 100 octane fuel…

If there is something that I am forgetting or if you guys have any advice could you please let me know before I go and test drive it ? I am doing it on Sunday.

Here is a list of a couple of thing that I have already done to my car…

Under the hood I have GT 40 heads , GT 40 lower and upper intake, E303 ford racing cam, 24 pounds injectors, Full exhaust with magaflow magapacks mufflers, cold air intake , MSD AL box , tremec 3550 with a short shifter, 4:10 gears with a full locker
 
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Nov 10, 2007
#2
  • Nov 10, 2007
  • #2
Have you upgraded your fuel pump?
 

FSTNG

New Member
Jun 11, 2007
37
0
0
Tampa Bay, FL
Nov 10, 2007
#3
  • Nov 10, 2007
  • #3
I run a dp progressive 200 shot on stock bottom end on only 93 pump gas with some octane booster. Only have forged pistons and I drop my WOT timing to 26 initial with 2 degrees more taken out at .5 seconds into n2o, 2 more removed at 1 second in for a total of 22 degrees @ WOT after 1 second of nitrous engagement, I pulse my solenoids from 50% to 100% over 1.5 seconds. I run 11.5:1 AFR on nitrous.

For your setup, I would say that running 100 octane and 10 degrees of initial timing at the dist (26 degrees max WOT) should be fine for a 75-100 shot. What did you gap your plugs to? I run a digital 6 and blaster hvcII coil so I opened my gap to about .045". You can start out around .038" and work your way up. If you wanted to be a little safer, you could set your initial timing to 8 degrees, or set it at 24 degrees and leave the spout out.

Oh, and I highly recommend a wideband gauge to anybody running forced induction.
 
J

JamesB88

Member
May 29, 2004
228
0
16
North Kansas City
Nov 10, 2007
#4
  • Nov 10, 2007
  • #4
I run a zex dry kit, 125 shot, my timing is set at 12 degree's run normal 91 octane gas with regular old autolite 25s with no problems.
 
You must log in or register to reply here.

Similar threads

R
For Sale NEW 2026 OEM Rims and tires for sale
  • RSchultz
  • Aug 3, 2026
  • Other Classifieds
Replies
0
Views
157
Other Classifieds Aug 3, 2026
RSchultz
R
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
486
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
368
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
912
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?