TFI Tool

[BTG]

What type of socket do I need to replace the TFI? Where do I get one?

 

[stang22]

They sell them at AutoZone. It is a 7/32" or a 5.5mm. If you have an extra of either one of those sockets, you can grind the mid section down a little bit to make it work.

Tim

 

[HISSIN50]

Tim (aka ignition stud ) is right on. dont forget to get some heat sink grease for the installation of the module.

good luck.

 

[accidentprone86]

that 5.5mm socket will work but their is also an acutal tool
called "ford ignition modual tool" it is sold at tool zone.

 

[Daggar]

Tim (aka ignition stud )

I thought he was a wing nut!

 

[stang22]

I thought he was a wing nut!

Live and let learn?

Tim

Oh yeah, you can buy that tool at Autozone. It is a 5.5mm or 7/32". Did I say that already?

 

[HISSIN50]

I thought he was a wing nut!

ok, ignition guru. better?
You, Dags, are a nut. J/K

Um Tim, welcome to my world. I will often read a post [after a post of mine] and say to myself, "did I NOT just say that?"
oh well, better to have redundancy than no answer at all.