The two small holes hold the bracket for the brake pedal to the fire wall ,dont weld them up@horse sence if I recall correctly, the two smaller holes on either side here were from two sheet metal screws whose only purpose was the hold the pedal support in place on the assembly line until the master cylinder was installed, right?
I just want to make sure before I go ahead and weld those holes up.
That’s what I was thinking. There at least isn’t anything big enough left in it that will clog the blaster. I really just need to get the cowl finished so I can get it reinstalled.I just screened my enough to get big stuff out to keep it from clogging up the blaster. The media gets contaminated, but I used my glass beads over and over when I blasted my car.
I feel you pain on the stuff getting in every space imaginable!
I'm getting better at the patch work. I really need to get better by the time I start getting to exterior panels that people will actually see.the little metal patch looks good and the home blasting looks to be kickin rusts ass!