• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Build Thread The Hoopty Build

  • Thread starter Thread starter hoopty5.0
  • Start date Start date Mar 10, 2011
Prev
  • 1
  • …
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
Next
First Prev 15 of 18 Next Last

tca7291

I can see your wieners.
5 Year Member
Sep 1, 2011
1,801
152
143
Raleigh, NC
Jul 10, 2012
#281
  • Jul 10, 2012
  • #281
^ The simplest of things will always get you! HA! Hope you do post a video of her firing up tomorrow!
 

88LX5.Oh

15 Year Member
Dec 30, 2011
1,442
204
94
Arkansas
Jul 11, 2012
#282
  • Jul 11, 2012
  • #282
"....and now....I have a dead battery. Turn it off"
Made my night.
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 11, 2012
#283
  • Jul 11, 2012
  • #283
Well I woke up to rain. Enough so that there have been a few high water rescues in Houston already this morning. Soooo testing/tuning/videoing may not happen today. Guess I'll keep plugging away at cleaning up the interior.

SSeater looks like y'all got about 5 inches last night! Still high and dry down there?
 

Boosted92LX

It's only an inch or two. What's the big deal?
15 Year Member
Dec 19, 2010
5,721
4,244
224
Jul 11, 2012
#284
  • Jul 11, 2012
  • #284
hoopty5.0 said:
Well I woke up to rain. Enough so that there have been a few high water rescues in Houston already this morning. Soooo testing/tuning/videoing may not happen today. Guess I'll keep plugging away at cleaning up the interior.

SSeater looks like y'all got about 5 inches last night! Still high and dry down there?
Click to expand...


Pretty wet. No water in the house but everything else is underwater...two days in a row in wet work boots sucks.
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 11, 2012
#285
  • Jul 11, 2012
  • #285
Drove it today. Hell yeah mofos. Excuse the smoke, Need some VC breathers.



 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 11, 2012
#286
  • Jul 11, 2012
  • #286
Still runs rich, but better fouled plugs than burnt pistons.

Almost had it on a dyno today. Drove it to my buddies shop and another local mechanic showed up and says "Wanna dyno it?" Before I could say no, he was on the phone calling the local rice rocket supply to call in a favor. The owner said if the streets/tires were dry it would be OK but not today.

I'm glad, it wasn't ready for the dyno, but everyone else was. LOL.
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 17, 2012
#287
  • Jul 17, 2012
  • #287
Test drive = fail. Sent from side of road
 

fiveohwblow

Official Member
15 Year Member
Jul 21, 2005
2,169
145
155
Jul 17, 2012
#288
  • Jul 17, 2012
  • #288
hoopty5.0 said:
Test drive = fail. Sent from side of road
Click to expand...
go on...
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 17, 2012
#289
  • Jul 17, 2012
  • #289
fiveohwblow said:
go on...
Click to expand...

Well I posted that waiting on my dad to come rescue me. I was headed from my place over to theirs (~5 miles). Just got it home and back in the garage.

So I posted the videos of me driving it the other day and it was smoking. At first, no smoke, then a little, and as I got closer to my house (went to my buddies shop) the smoke got bad. It was coming from somewhere and getting on the headers. So today, I tried to troubleshoot the problem. I put on the valve cover breathers I forgot to put on last time, made sure the oil pan was tight, and made sure the oil filter was tight.

So this evening, I fired it up and tried to make it to my folks house. About 2 miles in, some smoke, and the further I drove, the worse it got. Finally, I pulled over fearing a fire. Absolutely cannot find a source. Its coming from the back of the engine somewhere, but not breathers, valve covers, or oil pan.

I have an idea, but I don't want to say it just yet. . . Speculation welcome.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,031
21,206
234
Box behind Walmart
Jul 17, 2012
#290
  • Jul 17, 2012
  • #290
I have three guesses...

Lower intake plenum (there will be oil running down the back of the heads)

Failure to seal the small the small gap between the heads and lifter valley (will look like plenum gasket until you get it apart)

Rear main (oil coming out of the bell housing)
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 17, 2012
#291
  • Jul 17, 2012
  • #291
Noobz347 said:
I have three guesses...

Lower intake plenum (there will be oil running down the back of the heads)

Failure to seal the small the small gap between the heads and lifter valley (will look like plenum gasket until you get it apart)

Rear main (oil coming out of the bell housing)
Click to expand...


I can rule out the rear main, but I will look into the other two tomorrow. I've got a pinched nerve or something in my back and am damn near vegetable status at this point.
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 17, 2012
#292
  • Jul 17, 2012
  • #292
On the bright side, I did manage to get most of my dash and center console back in. I thought about waiting to do the console until I got new carpet, but decided not to.



Uploaded with ImageShack.us

Still have a loooong ways to go in the interior department. I am by no means proud to show off any of this car yet. But this is a progress thread, whether it moves forward or backward, hahaha
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Jul 17, 2012
#293
  • Jul 17, 2012
  • #293
Those seats dude,..........
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 17, 2012
#294
  • Jul 17, 2012
  • #294
madmike1157 said:
Those seats dude,..........
Click to expand...

LOL... Meh, I know a guy that does seats.

Ill change them eventually, just for you, Mike.
 

fiveohwblow

Official Member
15 Year Member
Jul 21, 2005
2,169
145
155
Jul 18, 2012
#295
  • Jul 18, 2012
  • #295
I know it sounds silly, but is your pcv in place? Didn't pop out did it?
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Jul 18, 2012
#296
  • Jul 18, 2012
  • #296
fiveohwblow said:
I know it sounds silly, but is your pcv in place? Didn't pop out did it?
Click to expand...

He don't got no stinkin' PCV.
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Jul 18, 2012
#297
  • Jul 18, 2012
  • #297
hoopty5.0 said:
LOL... Meh, I know a guy that does seats.

Ill change them eventually, just for you, Mike.
Click to expand...
Hey, I appreciate the consideration,.....but no amount of seat foam and new fabric can fix those,.............................sorry.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,031
21,206
234
Box behind Walmart
Jul 18, 2012
#298
  • Jul 18, 2012
  • #298
Mike does seats for free.
 
Reactions: 88LX5.Oh

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 18, 2012
#299
  • Jul 18, 2012
  • #299
fiveohwblow said:
I know it sounds silly, but is your pcv in place? Didn't pop out did it?
Click to expand...

Carbed (for now)
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,780
6,935
214
SW Houston
Jul 18, 2012
#300
  • Jul 18, 2012
  • #300
madmike1157 said:
Hey, I appreciate the consideration,.....but no amount of seat foam and new fabric can fix those,.............................sorry.
Click to expand...

I know, I know. I'll get some different seats eventually. They may look like a bag of a**holes, but they aren't too bad to ride in.



Aside from that, I'm not sure if I'll get any work done as far as finding and fixing this leak today. I've got a pinched nerve or something in my lower back that is giving me fits, to say the least.
 
Prev
  • 1
  • …
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
Next
First Prev 15 of 18 Next Last
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
648
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
770
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
264
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
223
Other Auto Tech Monday at 1:17 PM
General karthief
Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
241
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?