Since i blew something down there, for the rebuild im gonna get a new stock block, ported trickflow heads with upgraded springs, 1.6 rockers and a cam. I cant decide what cam to go with but I found a guy selling a custom grind cam he had on his car. With this cam he had Edelbrock performer heads,a good intake and a S-trim pushing about 8-9 pounds. Also had a stock shortblock. Im gonna have ported trickflows, a cobra intake(ill get a better one soon after) a s-trim pushing about 10-11 #'s and a stock shortblock. Here are the specs on the cam.
Specs
LIFT: Intake @ cam 311 @ Valve .498 w/1.6 RR
Exhaust @ cam 311 @ Valve .498 w/1.6 RR
Cam lift with 1.7 rocker @ valve .528"
Cam timing
int opens 29deg BTDC closes 73deg ATDC
exh opens 77deg BTDC closes 25deg ATDC
ADV Duration 282/282
114 lobe seperation
2400rpm-6000rpm valve float at 6500rpm
Im gonna have Scorpian 1.6 rockers. Think this would be a good cam for me?
Specs
LIFT: Intake @ cam 311 @ Valve .498 w/1.6 RR
Exhaust @ cam 311 @ Valve .498 w/1.6 RR
Cam lift with 1.7 rocker @ valve .528"
Cam timing
int opens 29deg BTDC closes 73deg ATDC
exh opens 77deg BTDC closes 25deg ATDC
ADV Duration 282/282
114 lobe seperation
2400rpm-6000rpm valve float at 6500rpm
Im gonna have Scorpian 1.6 rockers. Think this would be a good cam for me?