Engine This wiring look correct?

limp

wrap a little cheese around it and its a done

5 Year Member

Oct 4, 2020

5,486

2,909

173

Florida

Oct 8, 2022

#1

• Oct 8, 2022

• #1

The attached pic has the wire loom coming over the top of the windshield wiper motor?
Shouldn't it be over the top of the booster but under the wiper motor?
Getting close to installing my new booster and I don't want to have to do it twice if I get the wire loom wrong..

 

85GTStangGuy

5 Year Member

May 19, 2021

1,003

625

133

Jax, Florida

Oct 8, 2022

#2

• Oct 8, 2022

• #2

Mine does not go over the wiper motor. And that's how it came from the factory. It also doesn't actually go under the wiper motor either. Once it crosses over the clutch cable area, it angles forward across the top of the brake booster and then heads downward where the booster meets the master cylinder. The wiper motor wires are behind that loom also.

As a side note, I've also seen that entire firewall loom be routed on the bottom surface of the firewall pinch weld. Probably held in place with zip ties and some holes drilled in the pinch weld. Cleans up that portion of the busy firewall a little bit.

 

Reactions: limp

General karthief

wonder how much it would cost to ship you a pair

Mod Dude

Aug 25, 2016

27,983

10,611

213

polk county florida

Oct 8, 2022

#3

• Oct 8, 2022

• #3

Do you need any of those white plastic wire loom tabs?
I got about a bunch to use on my car, more than I'll need.

 

limp

wrap a little cheese around it and its a done

5 Year Member

Oct 4, 2020

5,486

2,909

173

Florida

Oct 9, 2022

#4

• Oct 9, 2022

• #4

General karthief said:

Do you need any of those white plastic wire loom tabs?
I got about a bunch to use on my car, more than I'll need.

Click to expand...

Yes, appreciate it.... Perhaps we can do a " buy" at coffee? Thanks JR...

 

Reactions: General karthief

General karthief

wonder how much it would cost to ship you a pair

Mod Dude

Aug 25, 2016

27,983

10,611

213

polk county florida

Oct 9, 2022

#5

• Oct 9, 2022

• #5

Yeah, we be like drug dealers.
You pass me cash and I'll pass you a little bag

 

Bree

Active Member

Jan 12, 2021

215

87

38

Zanesville Ohio

Oct 16, 2022

#6

• Oct 16, 2022

• #6

Well, if by right/correct, you "the way it came from the factory, I'm not sure about that year. But, here's the thing, as long as it's not getting pinched, our bound up anywhere, or as long as it's not pulled tight trying to pull gourmets out or anything, you're fine.

 

evintho

20+ Year Stangneter

Nov 12, 2003

683

246

73

Santa Rosa, CA.

Oct 18, 2022

#7

• Oct 18, 2022

• #7

85GTStangGuy said:

As a side note, I've also seen that entire firewall loom be routed on the bottom surface of the firewall pinch weld. Probably held in place with zip ties and some holes drilled in the pinch weld. Cleans up that portion of the busy firewall a little bit.

Click to expand...

Yes it does.

 

Reactions: limp, General karthief and 85GTStangGuy