TwoToneHatch Active Member Mar 22, 2007 170 2 28 New Jersey Mar 3, 2010 #1 Mar 3, 2010 #1 I have a Trick Flow 70mm Throttle Body and when given light throttle it seems to stick. When you jab the gas real quick it returns to normal. Anyone else have this problem and how should I fix it?
I have a Trick Flow 70mm Throttle Body and when given light throttle it seems to stick. When you jab the gas real quick it returns to normal. Anyone else have this problem and how should I fix it?
Tanus New Member Dec 11, 2009 847 1 0 A to the Z Mar 4, 2010 #2 Mar 4, 2010 #2 you have to tighten the adj. screw a little bit, that will fix it
Tanus New Member Dec 11, 2009 847 1 0 A to the Z Mar 4, 2010 #3 Mar 4, 2010 #3 then afterwards reset the tsp then disconnect battery for 10 min
f8tlfiveo My wife likes my spool and blow-off valve. Aug 8, 2007 1,585 102 64 Lancaster, PA Mar 4, 2010 #4 Mar 4, 2010 #4 I had this happen before with the stock tb... It was just dirty around the blade.. Cleaned it out.. And the sticking went away..
I had this happen before with the stock tb... It was just dirty around the blade.. Cleaned it out.. And the sticking went away..
stykthyn I want to measure mine. It doesn't look that tall. 15 Year Member Jul 6, 2006 5,232 2,652 223 gainesville Mar 4, 2010 #5 Mar 4, 2010 #5 I have this happen when the throttle screw is backed out too far.
B BYRDPE Founding Member Nov 4, 1998 1,556 0 37 Memphis,Tn. Mar 4, 2010 #6 Mar 4, 2010 #6 i had this same issue with a edelbrock/bbk tb. i removed it and installed an accufab...problem resolved.
i had this same issue with a edelbrock/bbk tb. i removed it and installed an accufab...problem resolved.