throttle body trouble

95gtdude said:

I don't have any means of pulling my codes nor do I have the equipment to do it.

Click to expand...

If you have a paper clip and some wire you do. Go to www.fordfuelinjection.com on the side menu go to how to run codes .

Remember we use a 3 digit code system not 2.

When I got the 121, I had to replace the TPS. No issues since.

95gtdude said:

Was your Idle slow to come back down if and when it did after pushing the gas? I don't have any means of pulling my codes nor do I have the equipment to do it.

Click to expand...

after a blip of the throttle, the idle will hang high for 20 or 30 seconds in park unless I crank the a/c full blast. Also, you can check you codes at home for less than $3 total. I used about 6 inches of 16 gauge wire and then stripped/connected male flat blade quick disconnects to each end of the wire. Here is a link on how to perform the test www.allfordmustangs.com Let me know if you have any questions.

James
94 GT VERT AODE
Ported stock intake, 4.10's, shift kit, Granatelli MAF, BBK 70mm TB, 14*, BBK adj fpr, 2 chamber flows, BBK O/R H pipe, BBK underdrive pulleys, MSD 6A, Walbro 190 pump, k&n with silencer removed, sub-frame connectors, fan switch mod, 160* tstat , weight reduction